...
首页> 外文期刊>China Foundry >Deformation and fracture of a Zr-Al-Cu metallic glass ribbon under tension near glass transition temperature
【24h】

Deformation and fracture of a Zr-Al-Cu metallic glass ribbon under tension near glass transition temperature

机译:Zr-Al-Cu金属玻璃带在接近玻璃化转变温度的张力下的变形和断裂

获取原文

摘要

The high temperature tensile and fracture behavior of Zr 50 Al 40 Cu 10 metallic glass at the temperature range in the vicinity of glass transition were investigated. Tensile tests were carried out at room temperature, 350-420 ° C, and in the supercooled liquid region temperature range, respectively. Obvious plastic deformation was initiated at temperature about 80 ° C lower than the glass transition temperature. The ultimate tensile strength decreases with the increase of testing temperature and the ductility increases with temperature. At temperature higher than T g , viscous flow of Non-Newtonian fluid led to super plastic deformation behavior. The deformation process under tension was inhomogeneous, and remarkable serrations were observed on the stress-strain curve near glass transition temperature.
机译:研究了Zr 50 Al 40 Cu 10金属玻璃在玻璃化转变附近温度范围内的高温拉伸和断裂行为。拉伸试验分别在室温,350-420℃和过冷液体区域温度范围内进行。在比玻璃化转变温度低约80℃的温度下开始明显的塑性变形。极限抗拉强度随测试温度的升高而降低,而延展性则随温度的升高而提高。在高于T g的温度下,非牛顿流体的粘性流导致超塑性变形行为。拉伸下的变形过程是不均匀的,并且在接近玻璃化转变温度的应力-应变曲线上观察到明显的锯齿。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号