首页> 外文期刊>Bulletin of the Polish Academy of Sciences. Technical Sciences >Determination of synchronous generator nonlinear model parameters based on power rejection tests using a gradient optimization algorithm
【24h】

Determination of synchronous generator nonlinear model parameters based on power rejection tests using a gradient optimization algorithm

机译:基于梯度优化算法的功率抑制试验确定同步发电机非线性模型参数

获取原文
           

摘要

The paper presents a method for determining electromagnetic parameters of different synchronous generator models based on dynamic waveforms measured at power rejection. Such a test can be performed safely under normal operating conditions of a generator working in a power plant. A generator model was investigated, expressed by reactances and time constants of steady, transient, and subtransient state in the d and q axes, as well as the circuit models (type (3,3) and (2,2)) expressed by resistances and inductances of stator, excitation, and equivalent rotor damping circuits windings. All these models approximately take into account the influence of magnetic core saturation. The least squares method was used for parameter estimation. There was minimized the objective function defined as the mean square error between the measured waveforms and the waveforms calculated based on the mathematical models. A method of determining the initial values of those state variables which also depend on the searched parameters is presented. To minimize the objective function, a gradient optimization algorithm finding local minima for a selected starting point was used. To get closer to the global minimum, calculations were repeated many times, taking into account the inequality constraints for the searched parameters. The paper presents the parameter estimation results and a comparison of the waveforms measured and calculated based on the final parameters for 200 MW and 50 MW turbogenerators.
机译:本文提出了一种基于功率抑制时测量的动态波形确定不同同步发电机模型电磁参数的方法。这样的测试可以在发电厂工作的发电机的正常运行条件下安全地执行。研究了发电机模型,该模型由电抗和d,q轴上的稳态,瞬态和次瞬态状态的时间常数表示,以及由电阻表示的电路模型((3,3)和(2,2)类型)以及定子,励磁和等效转子阻尼电路绕组的电感。所有这些模型大约都考虑了磁芯饱和度的影响。最小二乘法用于参数估计。使目标函数最小化,该目标函数定义为测量波形与基于数学模型计算的波形之间的均方误差。提出了一种确定那些状态变量的初始值的方法,这些状态变量也取决于搜索到的参数。为了最小化目标函数,使用了一种梯度优化算法,该算法找到了选定起点的局部最小值。为了接近全局最小值,考虑到搜索参数的不等式约束,计算被重复了很多次。本文介绍了参数估计结果,并比较了基于200 MW和50 MW涡轮发电机的最终参数测量和计算的波形。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号