首页> 外文期刊>BioMedical Engineering OnLine >Flow and wall shear stress in end-to-side and side-to-side anastomosis of venous coronary artery bypass grafts
【24h】

Flow and wall shear stress in end-to-side and side-to-side anastomosis of venous coronary artery bypass grafts

机译:静脉冠状动脉搭桥术端侧和侧向吻合的流量和壁切应力

获取原文
           

摘要

Purpose Coronary artery bypass graft (CABG) surgery represents the standard treatment of advanced coronary artery disease. Two major types of anastomosis exist to connect the graft to the coronary artery, i.e., by using an end-to-side or a side-to-side anastomosis. There is still controversy because of the differences in the patency rates of the two types of anastomosis. The purpose of this paper is to non-invasively quantify hemodynamic parameters, such as mass flow and wall shear stress (WSS), in end-to-side and side-to-side anastomoses of patients with CABG using computational fluid dynamics (CFD). Methods One patient with saphenous CABG and end-to-side anastomosis and one patient with saphenous CABG and side-to-side anastomosis underwent 16-detector row computed tomography (CT). Geometric models of coronary arteries and bypasses were reconstructed for CFD analysis. Blood flow was considered pulsatile, laminar, incompressible and Newtonian. Peri-anastomotic mass flow and WSS were quantified and flow patterns visualized. Results CFD analysis based on in-vivo CT coronary angiography data was feasible in both patients. For both types of CABG, flow patterns were characterized by a retrograde flow into the native coronary artery. WSS variations were found in both anastomoses types, with highest WSS values at the heel and lowest WSS values at the floor of the end-to-side anastomosis. In contrast, the highest WSS values of the side-to-side anastomosis configuration were found in stenotic vessel segments and not in the close vicinity of the anastomosis. Flow stagnation zones were found in end-to-side but not in side-to-side anastomosis, the latter also demonstrating a smoother stream division throughout the cardiac cycle. Conclusion CFD analysis of venous CABG based on in-vivo CT datasets in patients was feasible producing qualitative and quantitative information on mass flow and WSS. Differences were found between the two types of anastomosis warranting further systematic application of the presented methodology on multiple patient datasets.
机译:目的冠状动脉搭桥术(CABG)手术代表了晚期冠状动脉疾病的标准治疗方法。存在两种主要的吻合类型,即通过使用端对侧或侧对侧吻合将移植物连接至冠状动脉。由于两种类型的吻合术通畅率的差异,仍然存在争议。本文的目的是使用计算流体力学(CFD)对CABG患者端对侧和侧对侧吻合的无创血流动力学参数进行量化,例如质量流量和壁切应力(WSS) 。方法1例隐性CABG端侧吻合术和1例隐性CABG端侧吻合术患者行16排CT扫描。重建冠状动脉和旁路的几何模型以进行CFD分析。血流被认为是搏动的,层流的,不可压缩的和牛顿的。定量分析了肛门吻合口的质量流量和WSS,并可视化了流型。结果基于体内CT冠状动脉造影数据的CFD分析在这两名患者中都是可行的。对于这两种类型的CABG,血流模式的特征都是逆行流入天然冠状动脉。在两种吻合术类型中均发现了WSS变异,在端到端吻合术中,最高的WSS值位于脚后跟,最低的WSS值位于底部。相反,在吻合口狭窄的血管段发现吻合结构的最高WSS值,而不是在吻合口附近。流量停滞区在端对端吻合处发现,而在端对端吻合处则没有,后者在整个心动周期中也显示出更平稳的分流。结论基于体内CT数据对患者静脉CABG进行CFD分析是可行的,可产生有关质量流量和WSS的定性和定量信息。发现两种类型的吻合之间的差异,需要在多个患者数据集上进一步系统地应用所介绍的方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号