首页> 外文期刊>Brazilian journal of chemical engineering >Estimation of particle concentration profiles in a three-phase fluidized bed from experimental data and using the wake model
【24h】

Estimation of particle concentration profiles in a three-phase fluidized bed from experimental data and using the wake model

机译:根据实验数据并利用尾流模型估算三相流化床中的颗粒浓度分布

获取原文
           

摘要

Particles with a size distribution in the range of 34 to 468 μm were fluidized in a three-phase bed using low liquid and gas velocities. Particle size distribution and pressure profile measurements were carried out at different locations in the bed in order to study the influence of fluid velocities on segregation and dispersion of particles in different size classes. The influence of gas velocity on particle mixing was analyzed in terms of internal solid fluxes, calculated by means of the wake model. Based on the experimental results, different particle distribution patterns were identified. Although no significant tendencies were observed for radial profiles, particles of different sizes have significantly different axial profiles, which are mainly affected by the velocity of the liquid phase. Thus, depending on the liquid velocity, smaller particles reach a maximum concentration at different bed heights.
机译:使用低液体和气体速度在三相床中流化尺寸分布在34至468μm范围内的颗粒。为了研究流体速度对不同尺寸类别的颗粒分离和分散的影响,在床的不同位置进行了粒径分布和压力分布测量。根据内部固体通量,通过尾流模型计算了气体速度对颗粒混合的影响。根据实验结果,确定了不同的颗粒分布模式。尽管没有观察到径向分布的明显趋势,但是不同尺寸的颗粒具有明显不同的轴向分布,这主要受液相速度的影响。因此,取决于液体速度,较小的颗粒在不同的床高度下达到最大浓度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号