Comparison of the stability of three fixation techniques between porous metal acetabular components and augments

摘要

Objectives In order to address acetabular defects, porous metal revision acetabular components and augments have been developed, which require fixation to each other. The fixation technique that results in the smallest relative movement between the components, as well as its influence on the primary stability with the host bone, have not previously been determined. Methods A total of 18 composite hemipelvises with a Paprosky IIB defect were implanted using a porous titanium 56?mm multihole acetabular component and 1?cm augment. Each acetabular component and augment was affixed to the bone using two screws, while the method of fixation between the acetabular component and augment varied for the three groups of six hemipelvises: group S, screw fixation only; group SC, screw plus cement fixation; group C, cement fixation only. The implanted hemipelvises were cyclically loaded to three different loading maxima (0.5?kN, 0.9?kN, and 1.8?kN). Results Screw fixation alone resulted in up to three times more moveme...