首页> 外文期刊>BMC Oral Health >Effect on enamel shear bond strength of adding microsilver and nanosilver particles to the primer of an orthodontic adhesive
【24h】

Effect on enamel shear bond strength of adding microsilver and nanosilver particles to the primer of an orthodontic adhesive

机译:在正畸胶粘剂底漆中添加微银和纳米银颗粒对釉质剪切粘结强度的影响

获取原文
获取外文期刊封面目录资料

摘要

Background The objective of this study was to determine whether the addition of microsilver or nanosilver particles to an orthodontic primer affects shear bond strength (SBS) and bracket/adhesive failure. Methods Bovine incisors were randomly divided into six groups with 16 specimens in each: In group 1 (control), brackets were bonded with Transbond? XT primer. In the experimental groups, microsilver (groups 2 and 3) and nanosilver (groups 4–6) particles of different sizes were added to Transbond XT primer and light cured for 15?seconds [group 2: 0.1% (w/w) microsilver particle size 3.5–18?μm; group 3: 0.3% (w/w) microsilver particle size 3.5–18?μm; group 4: 0.11% (w/w) nanosilver particle size 12.6–18.5?nm; group 5: 0.18% (w/w) nanosilver particle size 12.6–18.5?nm; group 6: 0.33% (w/w) nanosilver particle size 12.6–18.5?nm]. Thereafter, brackets were bonded by light curing the adhesive for 20?seconds. After 24?hours of storage in distilled water at 37°C, SBS was measured with a Zwicki 1120 testing machine. The adhesive remnant index and the prevalence of silver spots on the specimen surface were determined under 10× magnification. Statistical two-way analysis of variance was performed to compare SBS, and a chi-square test was used to compare ARI scores and the prevalence of silver spots. Results No significant differences in SBS (control: 16.59?±?6.82?MPa; group 2: 20.6?±?4.19?MPa; group 3: 16.98?±?4.84?MPa; group 4: 17.15?±?5.92?MPa; group 5: 20.09?±?3.35?MPa; group 6: 16.44?±?4.51?MPa; p?>?0.665) and ARI scores (p?=?0.901) were found between the control group and any experimental group. Only experimental groups with nanosilver particles revealed statistically more silver spots on the remaining adhesive. Conclusions Addition of small concentrations of microsilver or nanosilver particles affects neither SBS nor ARI scores. Addition of nanosilver particles results in silver spots in the remaining primer visible under 10× magnification. Further studies are needed to investigate the anti-caries potential and clinical performance of conventional orthodontic primer with incorporated nanosilver or microsilver particles.
机译:背景技术这项研究的目的是确定向正畸底漆中添加微银或纳米银颗粒是否会影响剪切粘结强度(SBS)和托槽/胶粘剂破坏。方法将牛切牙随机分为六组,每组16个标本:在第1组(对照组)中,用Transbond? XT底漆。在实验组中,将不同大小的微银(第2和3组)和纳米银(第4-6组)颗粒添加到Transbond XT底漆中并光固化15秒[组2:0.1%(w / w)的微银颗粒尺寸3.5–18?μm;第3组:0.3%(w / w)的微银粒径3.5–18?μm;第4组:0.11%(w / w)纳米银粒径12.6–18.5?nm;第5组:0.18%(w / w)纳米银粒径12.6–18.5?nm;第6组:0.33%(w / w)纳米银粒径12.6–18.5?nm]。此后,通过使粘合剂轻固化20秒钟来粘合托架。在37°C的蒸馏水中存储24小时后,用Zwicki 1120测试机测量SBS。在10倍放大倍数下测定了粘合剂残留指数和样品表面上银斑的发生率。进行统计的双向方差分析以比较SBS,并使用卡方检验比较ARI得分和银斑的患病率。结果SBS无显着差异(对照组:16.59±±6.82Ω·MPa;第2组:20.6±±4.19Ω·MPa;第3组:16.98±±4.84±MPa;第4组:17.15±±5.92±MPa;第5组:20.09±±3.35Ω·MPa;第6组:16.44±±4.51Ω·MPa;p≥0.665),并且在对照组和任何实验组之间发现ARI得分(p≥0.901)。仅具有纳米银颗粒的实验组统计上在剩余的粘合剂上显示出更多的银斑。结论添加少量的微银或纳米银颗粒不会影响SBS或ARI得分。纳米银颗粒的添加导致剩余底漆中的银点在10倍放大下可见。需要进一步的研究来研究掺有纳米银或微银颗粒的常规正畸引物的抗龋齿潜力和临床性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号