The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment

Zhanpeng Lu; Tetsuo Shoji; Yoichi Takeda; Yuzuru Ito; Seiya Yamazaki

首页> 外文期刊>Corrosion science >The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment

【24h】

The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment

机译：模拟BWR环境中应变硬化316L不锈钢在应力腐蚀开裂中裂纹扩展速率与加载方式和温度的关系

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

The stress corrosion cracking (SCC) growth rate of a warm-rolled (WR) 316L stainless steel contoured double cantilever (CDCB) specimen was measured in high purity water at various temperatures and under various loading patterns. An alternating current pot

机译：在高纯水中，不同温度和不同载荷模式下，测量了热轧（WR）316L不锈钢轮廓双悬臂（CDCB）试样的应力腐蚀开裂（SCC）增长率。交流电锅

著录项

来源
《Corrosion science》 |2008年第3期|p.698-712|共15页
作者
Zhanpeng Lu; Tetsuo Shoji; Yoichi Takeda; Yuzuru Ito; Seiya Yamazaki;
展开▼
作者单位

Fracture and Reliability Research Institute, Tohoku University, Aramaki Aoba 6-6-01, Aoba-ku, Sendai 980-8579, Japan;

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类金属腐蚀与保护、金属表面处理;
关键词
A. Simulated boiling-water reactor environment; A. Warm-rolled 316L stainless steel; C. Apparent thermal activation energy; C. Intergranular stress corrosion cracking; C. Crack growth rate;

机译：A.模拟沸水反应堆环境;A.热轧316L不锈钢;C。表观热活化能;C．晶间应力腐蚀开裂;C．裂纹增长率;

相似文献

外文文献
中文文献
专利

1. Intergranular stress corrosion cracking in simulated BWR water of 316L stainless steels manufactured with different procedures [J] . Liu Tingguang, Xia Shuang, Shoji Tetsuo Corrosion science . 2021,第May期

机译：用不同程序制造的316L不锈钢的模拟BWR水中的晶间应力腐蚀裂缝
2. Transient and steady state crack growth kinetics for stress corrosion cracking of a cold worked 316L stainless steel in oxygenated pure water at different temperatures [J] . Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Corrosion science . 2008,第2期

机译：316L不锈钢在不同温度下的氧化纯水中的应力腐蚀开裂的瞬态和稳态裂纹扩展动力学
3. Effects of Hydrogen Peroxide on Intergranular Stress Corrosion Cracking of Stainless Steel In High Temperature Water (Ⅲ) Crack Growth Rates in Corrosive Environment Determined by Hydrogen Peroxide [J] . Yoichi WADA, Atsushi WATANABE, Masahiko TACHIBANA Journal of nuclear science and technology . 2001,第10期

机译：过氧化氢对高温水中不锈钢晶间应力腐蚀开裂的影响（Ⅲ）过氧化氢测定的腐蚀环境下裂纹的扩展速率
4. EFFECTS OF LOADING MODE AND TEMPERATURE ON STRESS CORROSION CRACKING GROWTH BEHAVIOR OF STRAIN-HARDENED 316L STAINLESS STEELS IN OXYGENATED PURE WATER [C] . Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems 2007 . 2007

机译：加载方式和温度对纯水中变质的316L不锈钢的应力腐蚀开裂行为的影响
5. Stress corrosion cracking in 316 austenitic stainless steel in a dilute sodium chloride solution at a moderately elevated temperature. [D] . Ma, Wing Han. 2010

机译：316奥氏体不锈钢在适度升高的温度下在稀氯化钠溶液中的应力腐蚀开裂。
6. Stress Corrosion Behaviors of 316LN Stainless Steel in a Simulated PWR Primary Water Environment [O] . Yong Huang, Weisong Wu, Shuo Cong, 2018

机译：316LN不锈钢在模拟压水堆原水环境中的应力腐蚀行为
7. Effects of Hydrogen Peroxide on Intergranular Stress Corrosion Cracking of Stainless Steel in High Temperature Water, (III). Crack Growth Rates in Corrosive Environment Determined by Hydrogen Peroxide. [O] . Yoichi WADA, Atsushi WATANABE, Masahiko TACHIBANA, 2000

机译：过氧化氢对高温水中不锈钢晶间应力腐蚀裂纹的影响，（III）。由过氧化氢确定腐蚀性环境中的裂纹生长率。
8. Stress corrosion crack growth rates in Type 304 stainless steel in simulated BWR environments [R] . 1984

机译：模拟BWR环境中304型不锈钢的应力腐蚀裂纹扩展速率

The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment

摘要

著录项

相似文献

相关主题

期刊订阅