首页> 外文期刊>Corrosion science >Evolution and characterization of the film formed on super 13Cr stainless steel in CO_2-saturated formation water at high temperature
【24h】

Evolution and characterization of the film formed on super 13Cr stainless steel in CO_2-saturated formation water at high temperature

机译:超级13Cr不锈钢在高温CO_2饱和地层水中形成的膜的形成与表征。

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The evolution and characterization of films formed on super 13Cr at 90 degrees C and 200 degrees C were investigated by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Focus Ion Beam (FIB) and Transmission Electron Microscopy (TEM) and localized Raman spectroscopy. The results show that super 13Cr maintains a passive state at 90 degrees C, while an active state exists with a high corrosion rate of 0.43 mm/year at 200 degrees C for the first 5 h, then stabilizes to a rate of 0.125 mm/year over 5 days exposure. The passive film formed at 90 degrees C is an amorphous-like structure with high Cr content, while the corrosion product films formed at 200 degrees C are mainly comprised of nanocrystalline spinel FeCr2O4 and crystalline FeCO3.
机译:通过扫描电子显微镜(SEM),X射线衍射(XRD),X射线光电子能谱(XPS),聚焦离子束(FIB)研究了在90℃和200℃下在超级13Cr上形成的膜的演变和表征。 ),透射电子显微镜(TEM)和局部拉曼光谱。结果表明,超级13Cr在90摄氏度时保持被动状态,而在200摄氏度下的前5小时内,存在的主动状态具有0.43毫米/年的高腐蚀速率,然后稳定到0.125毫米/年的速率超过5天的暴露时间。在90℃下形成的钝化膜是具有高Cr含量的非晶状结构,而在200℃下形成的腐蚀产物膜主要由纳米晶尖晶石FeCr 2 O 4和结晶FeCO 3组成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号