首页> 外文期刊>Control Engineering Practice >Leak diagnosis in pipelines based on a Kalman filter for Linear Parameter Varying systems
【24h】

Leak diagnosis in pipelines based on a Kalman filter for Linear Parameter Varying systems

机译:基于Kalman滤波器的线轴滤波器泄漏诊断线性参数变化系统

获取原文
获取原文并翻译 | 示例
           

摘要

This paper proposes a new approach for the leak diagnosis problem in pipelines based on the use of a Kalman filter for Linear Parameter Varying (LPV) systems. Such a filter considers the availability of flow and pressure measurements at each end of the pipeline. The proposed methodology relies on an LPV model derived from the nonlinear description of the pipeline. For the Kalman filter design purposes, the LPV model is transformed into a polytopic representation. Then, using such a representation, the LPV Kalman filter is designed by solving a set of Linear Matrix Inequalities (LMIs) offline. In the online implementation, the observer gain is calculated as an interpolation of those gains previously computed at the vertices of the polytopic model. The main advantages of this approach are: a) the embedding of the nonlinearities in the varying parameters allows the quasi-LPV system to be obtained which is equivalent to the original nonlinear one, and; b) the use of the well-known LMIs to compute the Kalman gain allows the extension to the LPV case. Those aspects are the main advantages with respect to the classic design of the Extended Kalman Filter (EKF) that requires a linearization procedure and the solution of the Ricatti equation at each iteration. To illustrate the potential of this method, a test bed plant built at Cinvestav-Guadalajara is used. Additionally, the results presented are compared with those results obtained through the classical EKF showing that LPV Kalman observer outperforms the classical EKF.
机译:本文提出了一种基于使用Kalman滤波器进行线性参数变化(LPV)系统的Kalman滤波器泄漏诊断问题的新方法。这种过滤器考虑了管道的每一端的流量和压力测量的可用性。所提出的方法依赖于来自管道的非线性描述的LPV模型。对于卡尔曼滤波器设计目的,LPV模型转变为多种子质表示。然后,使用这样的表示,通过求解一组线性矩阵不等式(LMI)离线来设计LPV Kalman滤波器。在在线实现中,观察者增益被计算为先前在多粒子模型的顶点计算的那些增益的插值。这种方法的主要优点是:a)不同参数中的非线性的嵌入允许获得等同于原始非线性的Quasi-LPV系统,并且; b)使用众所周知的LMI来计算卡尔曼增益允许扩展到LPV案例。这些方面是关于需要线性化过程的扩展卡尔曼滤波器(EKF)的经典设计的主要优点是在每次迭代时进行线性化过程和Ricatti等式的解决方案。为了说明这种方法的潜力,使用了在Cinvestav-Guadalajara的测试床厂。另外,将呈现的结果与通过经典EKF获得的结果进行比较,显示LPV卡尔曼观察者优于经典EKF。

著录项

  • 来源
    《Control Engineering Practice》 |2021年第10期|104888.1-104888.11|共11页
  • 作者单位

    Centro de Investigacidn Innovation y Desarrollo Tecnologko CIIDETEC-UVM Universidad del Valle de Mexico Campus Guadalajara Sur CP 45601 Tlaquepaque Jalisco Mexico;

    Institut de Robotica i Informatica Industrial CSIC-UPC Llorens i Artigas 4-6 08028 Barcelona Spain;

    Centro Universitario de Ciencias Exactas e Ingenierias CUCEI Universidad de Guadalajara CP 44430 Guadalajara Jalisco Mexico;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Fault diagnosis; Pipelines; Leaks; LPV system; LMI; Kalman filter;

    机译:故障诊断;管道;泄漏;LPV系统;LMI;卡尔曼滤波器;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号