首页> 外文期刊>Control Engineering Practice >Sensor-network-based robust distributed control and estimation
【24h】

Sensor-network-based robust distributed control and estimation

机译:基于传感器网络的鲁棒分布式控制和估计

获取原文
获取原文并翻译 | 示例
       

摘要

This paper proposes a novel distributed estimation and control method for uncertain plants. It is of application in the case of large-scale systems, where each control unit is assumed to have access only to a subset of the plant outputs, and possibly controls a restricted subset of input channels. A constrained communication topology between nodes is considered so the units can benefit from estimates of neighboring nodes to build their own estimates. The paper proposes a methodology to design a distributed control structure so that the system is asymptotically driven to equilibrium with l2-gain disturbance rejection capabilities. A difficulty that arises is that the separation principle does not hold, as every single unit ignores the control action that other units might be applying. To overcome this, a two-stage design is proposed: firstly, the distributed controllers are obtained to robustly stabilize the plant despite the observation errors in the controlled output. At the second stage, the distributed observers are designed aiming to minimize the effects of the communication noise in the observation error. Both stages are formulated in terms of linear matrix inequalities. The performance is shown on a level-control real plant.
机译:提出了一种不确定植物的分布式估计与控制方法。它适用于大型系统,其中假定每个控制单元只能访问工厂输出的子集,并且可能控制输入通道的受限子集。考虑节点之间的受约束的通信拓扑,因此单元可以受益于相邻节点的估计以建立其自己的估计。本文提出了一种设计分布式控制结构的方法,以使系统渐近驱动到具有12增益抑制能力的平衡。出现的困难是分离原理不成立,因为每个单元都忽略了其他单元可能正在应用的控制操作。为了克服这个问题,提出了一个两阶段的设计方案:首先,获得分布式控制器以稳固地稳定工厂,尽管在受控输出中存在观察误差。在第二阶段,设计分布式观测器的目的是使通信噪声对观测误差的影响最小。两个阶段都是根据线性矩阵不等式制定的。性能在级别控制的实际工厂上显示。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号