Progressive edge cracked aluminium plate repaired with adhesively bonded composite patch under full width disbond

摘要

In this study, the crack growth behaviour of an aluminium plate cracked at the tip and repaired with a bonded boron/epoxy composite patch in the case of full-width disbond was investigated. This effect is the imperfection which could result during the bonded patch of the repaired structure. Disbonds of various sizes and situated at different positions with respect to the crack tip as well as the effect of adhesive and patch thickness on repair performance were examined. An analysis procedure involving the efficient finite element modelling applied to cracked plate, adhesive and composite patch was used to compute the stress intensity factors. The crack growth rate is dominated by the stress intensity factor near the location and size of the pre-existing disbonds. The cracked plate and disbond propagation result in an increase in the patch deformation. The patch does not have an influence on the crack growth when the ratio 2α/d_R exceeds 0.8.