首页> 外文期刊>Composites >Buckling and free vibration analysis of functionally graded sandwich micro-beams resting on elastic foundation by using nonlocal strain gradient theory in conjunction with higher order shear theories under thermal effect
【24h】

Buckling and free vibration analysis of functionally graded sandwich micro-beams resting on elastic foundation by using nonlocal strain gradient theory in conjunction with higher order shear theories under thermal effect

机译:基于非局部应变梯度理论结合高阶剪切理论的弹性作用下功能梯度夹层微梁屈曲和自由振动分析

获取原文
获取原文并翻译 | 示例
       

摘要

Based on the nonlocal strain gradient theory (NLSGT), and various higher order shear deformation beam theories a formulation for buckling and free vibration of size dependent functionally graded sandwich micro-beams resting on two parameter elastic foundation including Winkler and Pasternak shear layer springs with thermal effects is presented. The sandwich FG micro-beams are assumed to be formed with homogenous ceramic core and ceramic-metal FG skins. According to the Mori-Tanaka homogenization scheme and the classical rule of mixture the material properties of the FG part of the sandwich size dependent beam changes continuously through the thickness of the beam. Equations of motion and the associated boundary conditions are derived via Hamilton's principle. Static buckling loads and natural frequencies are obtained by using generalized differential quadrature method (GDQM) for size dependent sandwich FG beam with different boundary conditions. As original contributions to the literature, the effects of the nonlocal parameter (ea), the length scale parameter (l(m)), aspect ratio (L/h), gradient index (k), different cross-section shapes, temperature change (Delta T)and stiffnesses of Winker and shear layer springs (K-W, K-S respectively) on the buckling and free vibration of the sandwich FG micro-beam are investigated, reported and discussed in detail. To verify the present formulation present results (buckling and free vibration) are compared with the previously published results. Good agreement is observed between the present solutions and the previously published results.
机译:基于非局部应变梯度理论(NLSGT)和各种高阶剪切变形梁理论,基于尺寸参数的功能梯度夹层微梁的屈曲和自由振动的公式基于Winkler和Pasternak两参数弹性地基,具有热剪力效果介绍。假定夹层FG微梁由均匀的陶瓷芯和陶瓷金属FG蒙皮形成。根据Mori-Tanaka均匀化方案和经典的混合规则,与夹心尺寸相关的梁的FG部分的材料属性会在梁的厚度范围内连续变化。运动方程和相关的边界条件是根据汉密尔顿原理导出的。对于具有不同边界条件的尺寸相关夹层FG梁,使用广义差分正交方法(GDQM)获得了静态屈曲载荷和固有频率。作为文献的原始贡献,非局部参数(ea),长度比例参数(l(m)),纵横比(L / h),梯度指数(k),不同横截面形状,温度变化的影响研究,报道和详细讨论了夹层FG微梁的屈曲和自由振动对Winker和剪力层弹簧(分别为KW,KS)的ΔT和刚度。为了验证本配方,将当前结果(屈曲和自由振动)与以前发表的结果进行了比较。在当前解决方案和以前发布的结果之间观察到良好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号