首页> 外文期刊>Communications, IET >On channel estimation of orthogonal frequency-division multiplexing amplify-and-forward cooperative relaying systems
【24h】

On channel estimation of orthogonal frequency-division multiplexing amplify-and-forward cooperative relaying systems

机译:正交频分复用放大转发协作中继系统的信道估计

获取原文
获取原文并翻译 | 示例
           

摘要

This study investigates channel estimation for amplify-and-forward (AF) relaying systems. For a two-hop relaying system, channel estimation of a relay path (source-relay-destination) with AF relaying is unique because both individual source-to-relay (S-R) and relay-to-destination (R-D) links are necessary at the destination to perform the optimum combination of signals received from the direct path (source-to-destination) and relay path if employing a cooperative diversity transmission. Until now, most literature about channel estimation on relaying systems has focused on the composite channel of the relay path, and not its individual links. Current methods to separate the estimation of both individual links require the relay to either deliver a quantised version of the S-R link estimate through an independent feed-forward channel, or to perform discrete Fourier transform/inverse discrete Fourier transform operations before amplifying the received signals. In this study, the respective channel estimations are done at the destination. First, the destination utilises a relay amble (R-amble) to obtain channel estimation of the R-D link. Next, exploiting the R-D link estimate, a maximum-likelihood estimator is proposed for the S-R link in a decision-directed (DD) way. Simulation results show that the proposed scheme out performs the current relay-assisted methods in most circumstances. In addition, numerical results reveal that the mean-square error can be significantly reduced in a DD way for symbol error rates of interest.
机译:这项研究调查了放大转发(AF)中继系统的信道估计。对于两跳中继系统,具有AF中继的中继路径(源-中继-目标)的信道估计是唯一的,因为在以下位置都需要单独的源-中继(SR)和中继-目标(RD)链路如果采用协作分集传输,则目的地将执行从直接路径(源到目的地)和中继路径接收的信号的最佳组合。到目前为止,关于中继系统信道估计的大多数文献都集中在中继路径的复合信道上,而不是其单独的链路上。分离两个单独链路的估计的当前方法要求中继器通过独立的前馈信道来传递S-R链路估计的量化版本,或者在放大接收信号之前执行离散傅里叶变换/离散傅里叶逆变换操作。在这项研究中,各个信道的估计是在目的地进行的。首先,目的地利用中继码(R-amble)来获得R-D链路的信道估计。接下来,利用R-D链路估计,以决策导向(DD)的方式为S-R链路提出了最大似然估计器。仿真结果表明,所提出的方案在大多数情况下都可以执行当前的中继辅助方法。另外,数值结果表明,对于感兴趣的符号错误率,均方误差可以以DD的方式大大降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号