...
首页> 外文期刊>Combustion and Flame >Local flame structure analysis in turbulent CH_4/air flames with multi-regime characteristics
【24h】

Local flame structure analysis in turbulent CH_4/air flames with multi-regime characteristics

机译:具有多区域特性的湍流CH_4 /空气火焰中的局部火焰结构分析

获取原文
获取原文并翻译 | 示例
           

摘要

In practical applications, partial premixing of fuel and oxidizer, as well as recirculation of combustion products, result in complex combustion scenarios where multi-regime effects arise and a numerical representation of local reaction zones by purely premixed or purely non-premixed flame structures may not hold. Here, a novel burner system is introduced to investigate the fundamental characteristics of multiregime combustion and to provide a basis for validating numerical models. This multi-regime burner (MRB) is specifically designed to produce flames with multi-regime characteristics while maintaining well-defined boundary conditions. Thermochemical data from Raman/Rayleigh/CO-LIF scattering experiments are provided for two selected operating conditions. The experimental investigation focuses on the overall flame structure by examining radial profiles of temperature and mixture fraction, as well as scatter plots of temperature, CH4, and CO versus mixture fraction. In order to assess the relative importance of different flame regimes, the gradient-free regime identification (GFRI) approach is extended to allow for an automated classification of local reaction zone structures. Classification criteria are defined, based on the ratio of local heat release rate peaks associated with premixed and non-premixed reaction zones located in close spatial proximity, and an automated process is implemented to classify 1D Raman/Rayleigh sample lines as premixed, dominantly premixed, multi-regime, dominantly non-premixed, or non-premixed flame zones. The importance of different flame zones, indicated by their population fractions, are found to evolve with downstream distance and show distinct differences between the two selected flames. Further, a prior analysis is used to test the applicability of 1D flame structure assumptions for the underlying combustion regime. (C) 2019 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
机译:在实际应用中,燃料和氧化剂的部分预混合以及燃烧产物的再循环会导致复杂的燃烧情况,其中会产生多区域效应,并且通过纯预混合或纯非预混合火焰结构无法局部表示反应区域保持。在这里,介绍了一种新颖的燃烧器系统,以研究多区域燃烧的基本特征,并为验证数值模型提供基础。这种多区域燃烧器(MRB)专为产生具有多区域特性的火焰而设计,同时保持界限分明的边界条件。针对两个选定的操作条件,提供了来自拉曼/瑞利/ CO-LIF散射实验的热化学数据。实验研究着眼于整个火焰结构,方法是检查温度和混合物分数的径向分布,以及温度,CH4和CO与混合物分数的散点图。为了评估不同火焰方案的相对重要性,扩展了无梯度方案识别(GFRI)方法以允许对本地反应区结构进行自动分类。基于与空间紧密相邻的预混合和非预混合反应区相关的局部放热速率峰值的比率,定义分类标准,并实施自动化流程将一维拉曼/瑞利样品线分类为预混合,占优势的预混合,多区域,主要是非预混或非预混火焰区域。人们发现,不同火焰区域的重要性(以其种群分数表示)随着下游距离的变化而发展,并显示出两个选定火焰之间的明显差异。此外,先前的分析用于测试一维火焰结构假设对基础燃烧方案的适用性。 (C)2019燃烧研究所。由Elsevier Inc.出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号