首页> 外文期刊>Clays and clay minerals >PROPERTIES OF SURFACE-MODIFIED COLLOIDAL PARTICLES
【24h】

PROPERTIES OF SURFACE-MODIFIED COLLOIDAL PARTICLES

机译:表面改性胶体颗粒的性质

获取原文
获取原文并翻译 | 示例
           

摘要

The reactivity of colloidal particles is regulated by their surface properties. These properties affect the wettability, flocculation-dispersion characteristics, ion exchange, sorption capacities and transport of inorganic colloids. Most studies have focused on hydrophilic, charged-particle surfaces, often ignoring the alterations in surface properties produced by the adsorption of natural organic matter, surfactants and other compounds. Adsorption of these substances can potentially render a surface substantially more hydrophobic. Nevertheless, comparatively little is known about changes in surface properties and reactivity of minerals upon sorption of hydrophobic organic compounds. In this study, the properties of four minerals (kaolinite, pyrophyllite, montmorillonite and Min-U-Sil~®) and two inorganic materials (X-ray amorphous Al hydroxide and X-ray amorphous Si oxide) were compared before and after treatment with the common silylating agent, trimethylchlorosilane (TMCS). The samples were characterized by measurements of total carbon, cation exchange capacity (CEC), particle size, specific surface area (SSA), electrophoretic mobility, contact angle, particle aggregation, and by X-ray diffraction and diffuse reflectance infrared spectroscopy. For the layer silicates, surface coverage was limited to ~2% trimethyl silane (TMSi). TMSi covered 7.5% of the Min-U-Sil~® surface and 33% of the X-ray amorphous Si oxide. Treatment did not affect the structure of the minerals but reduced the CEC, SSA and electrophoretic mobilities. Water contact angles increased to between 18 and 114° with treatment. While the apolar characteristic of the surfaces decreased minimally with treatment, the Lewis acid/base properties were substantially reduced and interfacial free energy shifted from positive to negative values indicating a more hydrophobic surface character. For all the samples except kaolinite, these changes affected the stability of the colloids in suspension depending upon solution pH. Although the grafting of TMSi altered colloidal mineral surface properties and increased their hydrophobicity, these changes were not sufficient to predict colloid aggregation behavior.
机译:胶体颗粒的反应性受其表面性质调节。这些性质影响无机胶体的润湿性,絮凝-分散特性,离子交换,吸附能力和运输。大多数研究集中在亲水的带电粒子表面上,通常忽略了天然有机物质,表面活性剂和其他化合物的吸附所产生的表面性质的变化。这些物质的吸附可以潜在地使表面实质上更疏水。然而,关于疏水性有机化合物吸附后矿物的表面性质和反应性的变化知之甚少。在这项研究中,比较了四种矿物(高岭石,叶蜡石,蒙脱石和Min-U-Sil〜®)和两种无机材料(X射线无定形氢氧化铝和X射线无定形氧化硅)的性能。常见的甲硅烷基化剂三甲基氯硅烷(TMCS)。通过测量总碳,阳离子交换容量(CEC),粒度,比表面积(SSA),电泳迁移率,接触角,颗粒聚集以及X射线衍射和漫反射红外光谱对样品进行表征。对于层状硅酸盐,表面覆盖率限于〜2%三甲基硅烷(TMSi)。 TMSi覆盖了7.5%的Min-U-Sil〜®表面和33%的X射线非晶硅氧化物。处理不会影响矿物的结构,但会降低CEC,SSA和电泳迁移率。处理后,水接触角增加到18至114°之间。尽管处理后表面的非极性特征最小程度地降低,但路易斯酸/碱的性质却大大降低,界面自由能从正值变为负值,表明其疏水性更强。对于除高岭石以外的所有样品,这些变化都会影响悬浮液中胶体的稳定性,具体取决于溶液的pH值。尽管TMSi的接枝改变了胶体矿物的表面性质并增加了它们的疏水性,但这些变化不足以预测胶体的聚集行为。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号