...
首页> 外文期刊>Circuits and systems >Anti-Windup Digital Control Design for Time-Delayed Analog Nonlinear Systems Using Approximated Scalar Sign Function
【24h】

Anti-Windup Digital Control Design for Time-Delayed Analog Nonlinear Systems Using Approximated Scalar Sign Function

机译:基于近似标量符号函数的时滞模拟非线性系统的抗缠绕数字控制设计

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

This paper describes an approximated-scalar-sign-function-based anti-windup digital control design for analog nonlinear systems subject to input constraints. As input saturation occurs, the non-smooth saturation constraint is modeled with the approximated scalar sign function which is a smooth nonlinear function. The resulting nonlinear model is further linearized at any operating point with the optimal linearization technique, and Linear Quadratic Regulator (LQR) is then applied for a state-feedback controller optimal for each operating point. As input saturation is encountered, an iterative procedure is developed to adjust control gains by systematically updating LQR weighting matrices until the inputs lie within the saturation limits. Through global digital redesign, the analog LQR controller is converted to an equivalent digital one for keeping the essential control performance, and moreover, delay compensation is taken into account during digital redesign for compensating the potential time delays in a control loop. The swing-up and stabilization control of single rotary inverted pendulum system is used to illustrate and verify the proposed method.
机译:本文介绍了一种受输入约束的基于近似标量信号函数的抗饱和数字控制设计。当发生输入饱和时,将使用平滑的非线性函数近似标量符号函数对非平滑饱和约束进行建模。使用最佳线性化技术在任何工作点上进一步线性化生成的非线性模型,然后将线性二次调节器(LQR)应用于每个工作点均最佳的状态反馈控制器。当遇到输入饱和时,开发了一种迭代程序来通过系统更新LQR加权矩阵来调整控制增益,直到输入位于饱和范围内。通过全局数字重新设计,模拟LQR控制器被转换为等效的数字控制器,以保持基本的控制性能,此外,在数字重新设计期间考虑了延迟补偿,以补偿控制回路中的潜在时间延迟。单旋转倒立摆系统的摆动和稳定控制用于说明和验证所提出的方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号