...
首页> 外文期刊>Canadian Metallurgical Quarterly >THE EFFECT OF STRAIN-AGING ON THE FRACTURE TOUGHNESS OF SOME STRUCTURAL GRADE STEELS IN THE NIL-DUCTILITY TEMPERATURE RANGE
【24h】

THE EFFECT OF STRAIN-AGING ON THE FRACTURE TOUGHNESS OF SOME STRUCTURAL GRADE STEELS IN THE NIL-DUCTILITY TEMPERATURE RANGE

机译:延性对零延性温度范围内某些结构钢的断裂韧性的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

L'effet du viellissement par écrouissage sur les caractéristiques de ténacité à l'impact de spécimens Charpy (CVN) et sur les valeurs K_(Ic) quasi-statiques de résistance à la rupture de certaines catégories d'aciers structuraux a été examiné dans le domaine de température de ductilité nulle. Le vieillissement par écrouissage provoque le décalage des courbes de Charpy vers des températures plus élevées mais, éton-nament, diminue les températures de ductilité nulle par rapport aux aciers à l'état original. La corrélation, à basse température, entre K_(Ic) et les propriétées mécaniques conventionelles confirment que la valeur de K_(Ic) des aciers viellis par écrouissage est plus élevée que celle des aciers ╚? l'état original, avec des énergies similaires d'impact Charpy. La même chose s'applique probablement également à l'intensité de contrainte lors de l'arrêt de crique ( K_(Ia)).%The effect of strain-aging on the impact toughness characteristics of Charpy specimens (CVN) and on the quasi-static fracture toughness values K_(Ic) of some structural grade steels, was investigated in the nil-ductility temperature range. Strain-aging provokes shifts of Charpy curves to higher temperatures, but, surprisingly, decreases the nil-ductility temperatures with respect to as-received steels. The low temperature correlation between K_(Ic) and the conventional mechanical properties confirms that the K_(Ic) value of as strain-aged steels is higher than that of as-received steels, with similar Charpy impact energy. The same probably applies to the stress intensity at crack arrest (K_(Ia)) as well.
机译:在工作中检查了工作硬化时效对夏比试样(CVN)的冲击韧性特征和某些类别结构钢断裂强度的准静态K_(Ic)值的影响。零延性温度范围。通过工作硬化的时效处理会使夏比曲线趋于较高的温度,但是与原始状态的钢相比,令人惊讶的是降低了零延展性的温度。低温下K_(Ic)与常规机械性能之间的相关性证实,经加工硬化时效的钢的K_(Ic)值高于╚?钢。原始状态,具有类似夏比冲击的能量。裂纹停止期间的应力强度(K_(Ia))也可能相同。%时效对夏比试样(CVN)的冲击韧性和准裂纹的影响在零延性温度范围内研究了某些结构等级钢的静态断裂韧性值K_(Ic)。应变时效引起夏比曲线向更高温度的偏移,但是令人惊讶的是,相对于刚接收的钢,其延展性降低了。 K_(Ic)与常规机械性能之间的低温相关性证实,在具有类似夏比冲击能的情况下,作为时效时效钢的K_(Ic)值高于按时接收的钢的K_(Ic)值。裂纹止裂处的应力强度(K_(Ia))也可能相同。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号