The possibility of producing the wedge-shaped folded cores for their application in the units of wing mechanization and aircraft control is estimated. Two variants of design concepts are considered, namely, with volume filling between the skins and with the sandwich-type skins. The regular quadriradiare and hexactinal structures as well as polar structures in order to obtain the wedge-shaped blocks on their basis are characterized. We synthesize and analyze five variants of structural solutions, which make it possible to provide greater extension of ribs or edge area of a crimped module, contacting with the skins. Two variants of constructions with sandwich panels on the basis of z- and v-crimps are proposed.%Проведена оценка возможности изготовления складчатых заполнителей клиновидной формы для применения в органах механизации крыла и управления самолетом. Рассмотрены два варианта конструктивных решений - с полным заполнением объема между обшивками и с обшивками типа сэндвич. Охарактеризованы рядовые четырех- и шестилучевые, а также полюсные структуры на предмет получения на их основе клиновидных блоков. Синтезировано и проанализировано пять вариантов структурных решений, позволяющих обеспечить большую протяженность ребер или площадь граней гофрового блока, контактирующих с обшивками. Предложено два варианта конструкций с сэндвич-панелями на основе модифицированных z- и v-гофров.
展开▼