Ni-P alloy-carbon black composite films fabricated by electrodeposition

摘要

Ni-P alloy-carbon black (CB) composite films were fabricated by electroplating and their microstruc-tures and properties were examined. The CB and phosphorus contents of the composite films were also investigated. The CB particles were found to be embedded in the Ni-P alloy matrix. The CB content in the deposits increased, reached a maximum value of 0.77 mass% with increasing CB concentration in the bath up to 10 gdrrr~(-3), and then decreased with a further increase in the CB concentration in the bath. Both before and after heat treatment, the composite films had higher hardnesses and lower friction coefficients than the Ni-P alloy films. Both before and after heat treatment, the friction coefficient of 0.77 mass% CB composite films was about half that of Ni-P alloy films without CB.