首页> 外文期刊>Applied Biochemistry and Biotechnology >Continuous Production of Ethanol from Starch Using Glucoamylase and Yeast Co-Immobilized in Pectin Gel
【24h】

Continuous Production of Ethanol from Starch Using Glucoamylase and Yeast Co-Immobilized in Pectin Gel

机译:葡糖淀粉酶和酵母共固定在果胶凝胶中从淀粉连续生产乙醇

获取原文
获取原文并翻译 | 示例
           

摘要

This work presents a continuous simultaneous saccharification and fermentation (SSF) process to produce ethanol from starch using glucoamylase and Saccharomyces cerevisiae co-immobilized in pectin gel. The enzyme was immobilized on macroporous silica, after silanization and activation of the support with glutaraldehyde. The silica–enzyme derivative was co-immobilized with yeast in pectin gel. This biocatalyst was used to produce ethanol from liquefied manioc root flour syrup, in three fixed bed reactors. The initial reactor yeast load was 0.05 g wet yeast/ml of reactor (0.1 g wet yeast/g gel), used in all SSF experiments. The enzyme concentration in the reactor was defined by running SSF batch assays, using different amount of silica–enzyme derivative, co-immobilized with yeast in pectin gel. The chosen reactor enzyme concentration, 3.77 U/ml, allowed fermentation to be the rate-limiting step in the batch experiment. In this condition, using initial substrate concentration of 166.0 g/l of total reducing sugars (TRS), 1 ml gel/1 ml of medium, ethanol productivity of 8.3 g/l/h was achieved, for total conversion of starch to ethanol and 91% of the theoretical yield. In the continuous runs, feeding 163.0 g/l of TRS and using the same enzyme and yeast concentrations used in the batch run, ethanol productivity was 5.9 g ethanol/l/h, with 97% of substrate conversion and 81% of the ethanol theoretical yield. Diffusion effects in the extra-biocatalyst film seemed to be reduced when operating at superficial velocities above 3.7 × 10−4 cm/s.
机译:这项工作提出了一种连续的同时糖化和发酵(SSF)工艺,使用共固定在果胶凝胶中的葡糖淀粉酶和酿酒酵母从淀粉生产乙醇。硅烷化并用戊二醛活化载体后,将酶固定在大孔二氧化硅上。二氧化硅-酶衍生物与酵母共固定在果胶凝胶中。该生物催化剂用于在三个固定床反应器中从液化木薯根粉糖浆生产乙醇。在所有SSF实验中使用的初始反应器酵母负荷为0.05 g湿酵母/ ml反应器(0.1 g湿酵母/ g凝胶)。通过运行SSF分批测定法来确定反应器中的酶浓度,方法是使用与酵母共固定在果胶凝胶中的不同量的二氧化硅-酶衍生物。选择的反应器酶浓度为3.77 U / ml,使发酵成为分批实验中的限速步骤。在这种条件下,使用初始底物浓度为166.0 g / l的总还原糖(TRS),1 ml凝胶/ 1 ml培养基,可以实现8.3 g / l / h的乙醇生产率,从而将淀粉完全转化为乙醇和理论产率的91%。在连续运行中,进料163.0 g / l的TRS,并使用与批量运行中相同的酶和酵母浓度,乙醇生产率为5.9 g乙醇/ l / h,底物转化率为97%,理论上为乙醇的81%让。当表面速度超过3.7×10−4 cm / s时,生物催化剂膜中的扩散效应似乎有所降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号