ROSS RIVER DAM - HYDRAULIC DESIGN CONSIDERATIONS FOR THE SPILLWAY UPGRADE

摘要

The Ross River Dam was constructed in 1974 following design by the State Government, including hydraulic model testing, by SMEC. The maximum spillway discharge at that time was 1100 m~3/s. Latterly, the dam and spillway have come up for a comprehensive review given that the dam is in an extreme hazard category because of its location only a short distance upstream of the city of Townsville. The revised hydrology has produced outflow hydrographs peaking at over 4 000 m~3/s - more than three and a half times the original -to be passed through the 130ft (39.62 m) wide spillway. The paper describes the hydraulic modelling planned and carried out to determine changes needed to handle such high discharges. The modelling was to provide for the installation of radial gates and piers, and study of the water level, pressure and dissipation conditions in the dissipator for several key discharges through the range to PMF. Pressure measurements included transients, consideration of the potential for uplift of the basin floor slabs, the integrity of the walls to handle the differential loads, and, as a major consideration, the energy conditions in the flow exiting the dissipator and the integrity of the rock downstream to avoid erosion. Each of these aspects will be addressed in the paper both from the modelling and interpretation standpoint and from the civil structural analysis standpoint, together with a description of the strengthening works required to achieve a satisfactory outcome.