首页> 外文期刊>AIAA Journal >Turbulent Wake of Rectangular Cylinder Near Plane Wall and Free Surface
【24h】

Turbulent Wake of Rectangular Cylinder Near Plane Wall and Free Surface

机译:靠近平面壁和自由表面的矩形圆柱的湍流

获取原文
获取原文并翻译 | 示例
           

摘要

This paper reports an experimental study of turbulent wake of a two-dimensional rectangular cylinder in a 2500-mm long, 186-mm wide, and 197-mm deep recirculating open channel. The water level upstream of the cylinder was maintained at 100 nun while the aspect and blockage ratios, defined, respectively, as the cylinder's length to thickness and the cylinder thickness to water depth, were 9 and 0.12. The cylinder was mounted across the channel at three different vertical locations: relatively close to the plane wall, close to the free surface, and relatively remote from both the plane wall and the free surface. For each of the preceding three locations, a particle image velocimetry technique was used to conduct detailed measurements at various streamwise-transverse planes around and downstream of the cylinder. For each test condition, the freestream velocity of the approach flow was kept constant at 0.356 m/s. The Reynolds number based on the cylinder thickness was 4270 and the Froude number was 0.36. From these measurements, the streamlines, isocontours of mean vorticity, as well as the mean velocities and turbulent quantities were obtained to document the effects of the plane wall and the free surface on the flow characteristics.
机译:本文报道了在2500mm长,186mm宽和197mm深的再循环明渠中二维矩形圆柱体的湍流尾流的实验研究。钢瓶上游的水位保持在100尼,而长宽比和堵塞率分别定义为钢瓶的长度对厚度和钢瓶的厚度对水深,分别为9和0.12。圆柱体在三个不同的垂直位置横跨通道安装:相对靠近平面壁,靠近自由表面,以及相对远离平面壁和自由表面。对于前面三个位置中的每一个,都使用了粒子图像测速技术在圆柱体周围和下游的各种横向横截面上进行详细的测量。对于每个测试条件,进场流的自由流速度保持恒定在0.356 m / s。基于圆柱体厚度的雷诺数为4270,弗洛德数为0.36。从这些测量中,获得了流线,平均涡度的等高线以及平均速度和湍流量,以记录平面壁和自由表面对流动特性的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号