首页> 外文期刊>Aerospace science and technology >Efficient second-order analytical solutions for airfoils in subsonic flows
【24h】

Efficient second-order analytical solutions for airfoils in subsonic flows

机译:亚音速流中机翼的高效二阶分析解决方案

获取原文
获取原文并翻译 | 示例
       

摘要

This paper presents simple and efficient analytical solutions for the velocity and pressure distributions on airfoils of arbitrary shapes, which are obtained considering the rigorous boundary conditions, without the use of the small perturbation assumption. A second-order accurate method using special singularities in the expression of the fluid velocity is first developed for airfoils in inviscid incompressible flows, by simultaneously solving the symmetric and anti-symmetric flow components defined by coupled boundary conditions. Accurate analytical solutions in closed form are thus derived and then successfully validated by comparison with the exact solutions for special airfoils obtained by conformal transformation and with numerical inviscid results. The method is then extended to model the main viscous effects on the velocity and pressure distributions, by considering the real velocity behavior at the airfoil trailing edge in viscous flow and the displacement thickness of the boundary layer developed on the airfoil and the wake. The resulting analytical solutions including viscous effects, derived for attached flows past airfoils at moderate angles of attack, were found in good agreement with experimental and numerical viscous results for various incidences, Reynolds and Mach numbers (Karman-Tsien compressibility correction was used to extend the solutions to compressible subsonic flows). In all cases studied (symmetric and cambered thick airfoils of arbitrary shapes, with rounded or pointed leading edges), these analytical solutions in closed form were found to be very efficient and accurate.
机译:本文针对任意形状的机翼上的速度和压力分布提出了简单有效的解析解,这些解是考虑到严格的边界条件而获得的,而无需使用小扰动假设。首先通过同时求解耦合边界条件定义的对称和反对称流动分量,针对不粘不可压缩流中的翼型,开发了一种使用特殊奇异性表示流体速度的二阶精确方法。因此,得出了封闭形式的精确分析溶液,然后与通过保角变换获得的特殊翼型的精确溶液进行比较,并与数值无粘性的结果进行比较,从而成功地对其进行了验证。然后,通过考虑粘滞流中翼型后缘处的实际速度行为以及翼型和尾流上形成的边界层的位移厚度,将该方法扩展为对速度和压力分布的主要粘性效应进行建模。发现的分析解决方案包括粘性效应,该粘性效应是在中等攻角下通过翼型的附着流而产生的,与各种入射,雷诺数和马赫数的实验和数值粘性结果(Karman-Tsien压缩性校正被用来扩展粘滞性)相吻合。可压缩亚音速流的解决方案)。在所研究的所有情况下(任意形状的对称且弯曲的厚翼型,具有圆形或尖锐的前缘),发现封闭形式的这些分析解决方案非常有效且准确。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号