首页> 外文期刊>Aerospace science and technology >Parametric reduced-order modeling of unsteady aerodynamics for hypersonic vehicles
【24h】

Parametric reduced-order modeling of unsteady aerodynamics for hypersonic vehicles

机译:高超声速飞行器非定常空气动力学的参数化降阶建模

获取原文
获取原文并翻译 | 示例
       

摘要

A novel parametric reduced-order model (ROM) is proposed for efficiently predicting hypersonic unsteady aerodynamic responses under different flight conditions. The construction of the ROM is realized by computational fluid dynamics (CFD) simulations under the prescribed motion of the structure, while the results are processed via the proper orthogonal decomposition (POD) to obtain the predominant flow modes. Subsequently, to obtain the ROM valid for varying flight conditions, the method of interpolation in a tangent space to a Grassmann manifold is used to generate a new POD modal matrix for the arbitrary operating point in the considered parameter space. Finally, the least squares support vector machine (LS-SVM) is carried out to obtain the nonlinear relations between the applied excitations and the resulting POD coefficients. Once the parametric ROM is constructed, it can behave as a substitution of the full-order CFD flow solver in the considered parameter space. For demonstration purposes, the parametric ROM is used to predict hypersonic unsteady aerodynamic loads, flutter boundaries and limit-cycle oscillations of a double wedge airfoil over a wide range of the flight conditions, respectively. Numerical investigations show a good agreement between the results obtained by the ROM methodology in comparison to the full-order CFD solution over a wide range of the parameters. In addition, the ROM approach yields a significant speedup regarding unsteady aerodynamic calculations, which is beneficial for aeroelastic analysis, control and optimization applications. (C) 2019 Elsevier Masson SAS. All rights reserved.
机译:提出了一种新颖的参数化降阶模型(ROM),用于有效预测不同飞行条件下的超音速非定常空气动力响应。 ROM的构造是通过在结构的指定运动下通过计算流体动力学(CFD)模拟来实现的,而结果则通过适当的正交分解(POD)处理以获得主要的流动模式。随后,为了获得适用于变化的飞行条件的ROM,在切空间中对Grassmann流形进行插值的方法用于为考虑的参数空间中的任意操作点生成新的POD模态矩阵。最后,使用最小二乘支持向量机(LS-SVM)获得所施加的激励与所得POD系数之间的非线性关系。一旦构建了参数ROM,它就可以在所考虑的参数空间中替代全阶CFD流求解器。出于演示目的,参量ROM用于分别预测在宽广的飞行条件下双楔形机翼的超音速非稳态气动载荷,颤振边界和极限循环振荡。数值研究表明,在各种参数范围内,与全阶CFD解决方案相比,ROM方法获得的结果之间具有良好的一致性。此外,ROM方法在非定常的空气动力学计算方面产生了显着的加速,这对于空气弹性分析,控制和优化应用是有益的。 (C)2019 Elsevier Masson SAS。版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号