首页> 外文期刊>Advanced Optical Materials >Characterization of Dynamic and Nanoscale Materials and Metamaterials with Continuously Referenced Interferometry
【24h】

Characterization of Dynamic and Nanoscale Materials and Metamaterials with Continuously Referenced Interferometry

机译:连续参考干涉法表征动态和纳米级材料及超材料

获取原文
获取原文并翻译 | 示例
           

摘要

The development of new optical materials and metamaterials has seen a natural progression toward both nanoscale geometries and dynamic performance. The development of these materials, such as optical metasurfaces which impart discrete, spatially dependent phase shifts on incident light, often benefits from the measurement of transmitted or reflected phase. Careful measurement of phase typically proves difficult to implement, due to high measurement sensitivity to practically unavoidable environmental sources of noise and drift. To date, no characterization technique has yet emerged as a frontrunner for these applications. This challenge is addressed using a custom-designed three-beam Mach-Zehnder interferometer capable of continuously referenced measurement of both phase and transmittance, resulting in a 10x reduction of noise and drift and phase measurement standard deviation over 10 min of 0.56 degrees and over 16 h of 2.8 degrees. High measurement stability provided by this method enables samples to be easily characterized under dynamic conditions. Temperature-dependent measurements are demonstrated with phase-change material vanadium dioxide (VO2), and with wavelength-dependent measurements of a dielectric Huygens metasurface supporting a characteristic resonant reflection peak. A Fourier-based signal filtering technique is applied, reducing measurement uncertainty to 0.13 degrees and enabling discernment of monolayer thickness variations in 2D material MoS2.
机译:新的光学材料和超材料的发展已经自然地朝着纳米级几何形状和动态性能发展。这些材料的发展,例如赋予入射光离散,空间相关的相移的光学超表面,通常得益于透射或反射相的测量。由于对实际不可避免的环境噪声和漂移源具有很高的测量灵敏度,因此通常很难对相位进行仔细的测量。迄今为止,还没有表征技术成为这些​​应用程序的领先者。使用定制设计的三光束Mach-Zehnder干涉仪解决了这一难题,该干涉仪能够连续参考相位和透射率的测量结果,从而在10分钟内将噪声和漂移降低了10倍,并且相位测量标准偏差在0.56度和16以上超过16 h为2.8度。这种方法提供的高测量稳定性使样品可以在动态条件下轻松表征。用相变材料二氧化钒(VO2)以及支持特征共振反射峰的介电惠更斯超表面的波长依赖测量值证明了温度依赖的测量值。应用基于傅立叶的信号滤波技术,可将测量不确定度降低至0.13度,并能够识别2D材料MoS2中单层厚度的变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号