...
首页> 外文期刊>Advanced Functional Materials >Organozinc Compounds as Effective Dielectric Modification Layers for Polymer Field-Effect Transistors
【24h】

Organozinc Compounds as Effective Dielectric Modification Layers for Polymer Field-Effect Transistors

机译:有机锌化合物作为聚合物场效应晶体管的有效介电改性层

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The interface between the organic semiconductor and dielectric plays an important role in determining the device performance of organic field-effect transistors (OFETs). Although self-assembled monolayers (SAMs) made from organosilanes have been widely used for dielectric modification to improve the device performance of OFETs, they suffer from incontinuous and lack uniform coverage of the dielectric layer. Here, it is reported that by introduction of a solution-processed organozinc compound as a dielectric modification layer between the dielectric and the silane SAM, improved surface morphology and reduced surface polarity can be achieved. The organozinc compound originates from the reaction between diethylzinc and the cyclohex-anone solvent, which leads to formation of zinc carboxylates. Being annealed at different temperatures, organozinc compound exists in various forms in the solid films. With organozinc modification, p-type polymer FETs show a high charge carrier mobility that is about two-fold larger than a control device that does not contain the organozinc compound, both for devices with a positive threshold voltage and for those with a negative one. After organozinc compound modification, the threshold voltage of polymer FETs can either be altered to approach zero or remain unchanged depending on positive or negative threshold voltage they have.
机译:有机半导体和电介质之间的界面在确定有机场效应晶体管(OFET)的器件性能方面起着重要作用。尽管由有机硅烷制成的自组装单层(SAMs)已被广泛用于介电改性以改善OFETs的器件性能,但它们具有不连续性且缺乏介电层的均匀覆盖性。这里,据报道,通过在电介质和硅烷SAM之间引入溶液处理的有机锌化合物作为电介质改性层,可以实现改善的表面形态和降低的表面极性。有机锌化合物源自二乙基锌与环己酮-丙酮之间的反应,这导致羧酸锌的形成。通过在不同温度下退火,有机锌化合物以各种形式存在于固体膜中。通过有机锌改性,对于具有正阈值电压的器件和具有负阈值电压的器件,p型聚合物FET的载流子迁移率都比不含有机锌化合物的控制器件高大约两倍。改性有机锌化合物后,可以根据聚合物FET的正或负阈值电压将其更改为接近零或保持不变。

著录项

  • 来源
    《Advanced Functional Materials》 |2012年第19期|4139-4148|共10页
  • 作者单位

    State Key Lab for Advanced Metal and Materials School of Materials Science and Engineering University of Science and Technology Beijing Beijing 100083, P. R. China;

    College of Chemistry and Chemical Engineering Central South University Changsha 410083, P. R. China;

    College of Chemistry and Chemical Engineering Central South University Changsha 410083, P. R. China;

    National Laboratory for Molecular Sciences Institute of Chemistry Chinese Academy of Sciences Beijing 100190, P. R.China;

    State Key Lab for Advanced Metal and Materials School of Materials Science and Engineering University of Science and Technology Beijing Beijing 100083, P. R. China;

    National Laboratory for Molecular Sciences Institute of Chemistry Chinese Academy of Sciences Beijing 100190, P. R.China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号