首页> 外文期刊>Accreditation and Quality Assurance: Journal for Quality, Comparability and Reliability in Chemical Measurement >Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System
【24h】

Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System

机译:邻苯二甲酸酯纯度测定的质量平衡方法:在日本校准服务系统中开发可作为溯源的主要参考物质

获取原文
获取原文并翻译 | 示例
           

摘要

Purity assay of high-purity materials (HPMs) of phthalic acid esters (PAEs) was carried out by means of a mass balance method. In this method, chromatographic methods such as gas chromatography-flame ionization detector (GC-FID) and/or high-performance liquid chromatography (HPLC) in combination with other methods such as Karl-Fischer (KF) titration and vacuum evaporation (VE) were applied. The sum of the impurities estimated by these methods allowed the estimation of the purity of the main component by difference. Seven PAEs with varying side chain structures and levels of impurities were analysed on a systematic way in which impurities were classified into several groups in terms of their abundance, availability of qualitative information and availability of authentic compounds, etc. The absolute quantity of each impurity was determined by GC-FID and/or HPLC based on the calibration made by the authentic compounds of impurities whenever available. The purities in mass fraction of these PAEs were certified at the National Metrology Institute of Japan (NMIJ), and the PAEs were registered as primary reference materials playing an essential role in linking the metrological traceability of the Japan Calibration Service System (JCSS) to the International System of Units (SI).
机译:邻苯二甲酸酯(PAE)的高纯度物质(HPM)的纯度测定是通过质量平衡法进行的。在这种方法中,色谱方法(例如气相色谱-火焰电离检测器(GC-FID)和/或高效液相色谱(HPLC))与其他方法(例如卡尔-费休(KF)滴定和真空蒸发(VE))结合使用被应用。通过这些方法估算的杂质总和可以通过差值估算主要成分的纯度。系统地分析了7种具有不同侧链结构和杂质含量的PAE,根据杂质的丰度,定性信息的可获得性和真实化合物的可获得性等将杂质分为几类。每种杂质的绝对量为通过GC-FID和/或HPLC进行测定,方法是根据可用的真实杂质化合物进行的校准。这些PAE的质量分数纯度已获得日本国家计量学会(NMIJ)的认证,并且PAE被注册为主要参考材料,在将日本校准服务系统(JCSS)的计量可追溯性与日本计量服务系统联系起来时起着至关重要的作用。国际单位制(SI)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号