首页> 美国卫生研究院文献>Beilstein Journal of Nanotechnology >Quantitative analysis of annealing-induced instabilities of photo-leakage current and negative-bias-illumination-stress in a-InGaZnO thin-film transistors
【2h】

Quantitative analysis of annealing-induced instabilities of photo-leakage current and negative-bias-illumination-stress in a-InGaZnO thin-film transistors

机译:A-Ingazno薄膜晶体管中光漏电流和负偏压照明应力的退火诱导稳定性的定量分析

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This study examines the effect of the annealing temperature on the initial electrical characteristics and photo-induced instabilities of amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs). The extracted electrical parameters from transfer curves suggest that a low-temperature treatment maintains a high density of defects in the IGZO bulk, whereas high-temperature annealing causes a quality degradation of the adjacent interfaces. Light of short wavelengths below 460 nm induces defect generation in the forward measurement and the leakage current increases in the reverse measurement, especially for the low-temperature-annealed device. The hysteresis after negative-bias-illumination-stress (NBIS) is quantitatively investigated by using the double-scan mode and a positive gate pulse. Despite the abnormal transfer properties in the low-temperature-treated device, the excited holes are identically trapped at the front interface irrespective of treatment temperature. NBIS-induced critical instability occurs in the high-temperature-annealed TFT.
机译:本研究检测退火温度对非晶铟镓锌(A-IGZO)薄膜晶体管(TFT)的初始电气特性和光诱导的稳定性的影响。来自转印曲线的提取的电气参数表明,低温处理在IGZO体积中保持高密度的缺陷,而高温退火导致相邻接口的质量劣化。短波长低于460nm的光引起前向测量中的缺陷产生,并且漏电流在反向测量中增加,特别是对于低温退火装置。通过使用双扫描模式和正栅脉冲定量地研究了负偏置照明 - 应力(NBIS)之后的滞后。尽管低温处理装置中的异常转移特性,但是兴奋的孔无论治疗温度如何相同地捕获在前界面处。 NBIS诱导的临界不稳定性发生在高温退火的TFT中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号