首页> 美国卫生研究院文献>Journal of Dental Sciences >Comparison of clinical fit of three-unit zirconia fixed prostheses fabricated using chairside and labside CAD/CAM systems

【2h】

Comparison of clinical fit of three-unit zirconia fixed prostheses fabricated using chairside and labside CAD/CAM systems

机译：使用椅旁和实验室旁CAD / CAM系统制造的三单元氧化锆固定假体的临床拟合比较

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

摘要
著录项
相似文献
相关主题

摘要

The purpose of this study was to assess the clinical fit provided by EZIS system, the newly commercialized chairside CAD/CAM system. Prostheses were fabricated with the chairside CAD/CAM system (CS) and labside CAD/CAM system (LS) and marginal, axial, and occlusal fit of the prostheses were compared and analyzed by using replica technique. CS group presented significantly lower fit in all the three fits compared to LS group. Differences in marginal fit, axial fit, and occlusal fit were 12.57 μm (P

机译：这项研究的目的是评估EZIS系统提供的临床适应性，EZIS系统是新型商业化的座椅旁CAD / CAM系统。假体由椅旁CAD / CAM系统（CS）和实验侧CAD / CAM系统（LS）制成，并通过复制技术比较和分析假体的边缘，轴向和咬合度。与LS组相比，CS组在所有三个拟合中的拟合度均显着降低。边缘贴合，轴向贴合和咬合贴合的差异为12.57μm（P

著录项

期刊名称 Journal of Dental Sciences
作者
Jong-Ju Ahn; Eun-Bin Bae; Wan-Sun Lee; Won-Tak Cho; Jung-Bo Huh;
展开▼
作者单位

展开▼
年(卷),期 2020(15),2
年度 2020
页码 -1
总页数 4
原文格式 PDF
正文语种
中图分类口腔科;牙科材料学;
关键词
CAD/CAM system; Chairside system; Labside system; Fitness; Replica technique;

机译：CAD / CAM系统;椅背系统;实验室系统;健身;仿制技术;

相似文献

外文文献
中文文献
专利

1. Comparison of clinical fit of three-unit zirconia fixed prostheses fabricated using chairside and labside CAD/CAM systems [J] . Jong-Ju Ahn, Eun-Bin Bae, Wan-Sun Lee, Journal of Dental Sciences . 2020,第2期

机译：三单元氧化锆固定假体使用椅子和Labside CAD / CAM系统的临床适用的比较
2. Marginal and internal fit of posterior three-unit fixed zirconia dental prostheses fabricated with two different CAD/CAM systems and materials [J] . Schoenberger Joana, Erdelt Kurt-Juergen, Baeumer Daniel, Clinical oral investigations . 2017,第8期

机译：边缘和内部适合后三单元固定氧化锆牙科假肢，用两个不同的CAD / CAM系统和材料制作
3. Three-unit posterior zirconia-ceramic fixed dental prostheses (FDPs) veneered with layered and milled (CAD-on) veneering ceramics: 1-year follow-up of a randomized controlled clinical trial [J] . Grohmann Philipp, Bindl Andreas, Haemmerle Christoph, Quintessence international . 2015,第10期

机译：三单元后置氧化锆陶瓷固定假牙（FDP）饰以层状和铣削（CAD-on）贴面陶瓷：随机对照临床试验的1年随访
4. Mechanical Properties of Zirconia 3-Unit Fixed Dental Prostheses Machined on a CAD/CAM System [C] . Carlos Nelson Elias, Heraldo Elias Salomao dos Santos, Claudinei dos Santos European conference on biomaterials . 2014

机译：在CAD / CAM系统上加工的氧化锆3单元固定式义齿的力学性能
5. In vitro study to test the capability of the CEREC CAD/CAM system to fabricate custom posts by direct scanning of simulated canal blocks and the factors affecting the accuracy of fit of CAD/CAM posts [D] . Bahabri, Rayan Hassan. 2016

机译：体外研究通过直接扫描模拟的运河块来测试CEREC CAD / CAM系统制造定制桩的能力以及影响CAD / CAM桩拟合精度的因素
6. Influence of Sequential CAD/CAM Milling on the Fitting Accuracy of Titanium Three-Unit Fixed Dental Prostheses [O] . Doo-Bin Song, Man-So Han, Si-Chul Kim, 2021

机译：顺序CAD / CAM铣削对钛三单元固定牙科假体的拟合精度的影响
7. Fracture resistance and failure mode of posterior fixed dental prostheses fabricated with two zirconia CAD/CAM systems [O] . López Suárez, Carlos, Gonzalo, Esther, Peláez, Jesús, 2015

机译：两个氧化锆CAD / CAM系统制造的后牙修复体的抗断裂性和破坏模式

Comparison of clinical fit of three-unit zirconia fixed prostheses fabricated using chairside and labside CAD/CAM systems

摘要

著录项

相似文献

相关主题

期刊订阅