首页> 美国卫生研究院文献>AAPS PharmSciTech >Excipient selection can significantly affect solid-state phase transformation in formulation during wet granulation
【2h】

Excipient selection can significantly affect solid-state phase transformation in formulation during wet granulation

机译:赋形剂的选择可显着影响湿法制粒过程中配方中的固态相变

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Phase transformations in formulations can lead to instability in physicochemical, biopharmaceutical, and processing properties of products. The influences of formulation design on the optimal dosage forms should be specified. The aim here was to investigate whether excipients with different water sorption behavior affect hydrate formation of nitrofurantoin in wet masses. Nitrofurantoin anhydrate was used as a hydrate-forming model drug, and 4 excipients with different water-absorbing potential (amorphous low-substituted hydroxypropylcellulose, modified maize starch, partially amorphous silicified microcrystalline cellulose, and crystalline α-lactose monohydrate) were granulated with varying amounts of purified water. Off-line evaluation of wet masses containing nitrofurantoin anhydrate and excipient (1∶1) was performed using an X-ray powder diffractometer (XRPD) and near-infrared spectroscopy, and drying phase was evaluated by variable temperature XRPD. Only amorphous excipient in the formulation retarded hydrate formation of an active pharmaceutical ingredient (API) at high water contents. Hygroscopic partially crystalline excipient hindered hydrate formation of API at low water contents. Crystalline excipient was unable to control hydrate formation of API. The character of excipient affects the stability of formulation. Thus, correct selection of excipients for the formulation can control processing-induced phase transitions and improve the storage stability of the final dosage form.
机译:制剂中的相变会导致产品的物理化学,生物制药和加工性能不稳定。应说明制剂设计对最佳剂型的影响。本文的目的是研究具有不同吸水特性的赋形剂是否会影响湿物质中呋喃妥因的水合物形成。使用无水呋喃妥因作为水合物形成模型药物,将4种具有不同吸水潜力的赋形剂(无定形低取代羟丙基纤维素,改性玉米淀粉,部分无定形硅化微晶纤维素和结晶α-乳糖一水合物)制粒。纯净水。使用X射线粉末衍射仪(XRPD)和近红外光谱仪离线评估含有无水呋喃妥因和赋形剂(1∶1)的湿物质,并通过可变温度XRPD评估干燥阶段。制剂中仅无定形赋形剂在高含水量时会阻止活性药物成分(API)的水合物形成。吸湿的部分结晶赋形剂在低水含量下会阻止API的水合物形成。结晶赋形剂不能控制API的水合物形成。赋形剂的性质影响制剂的稳定性。因此,正确选择用于制剂的赋形剂可以控制加工诱导的相变并改善最终剂型的储存稳定性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号