首页> 美国卫生研究院文献>other >4D-PET reconstruction using a spline-residue model with spatial and temporal roughness penalties
【2h】

4D-PET reconstruction using a spline-residue model with spatial and temporal roughness penalties

机译:使用样条残差模型进行4D-PET重构并具有时空粗糙度惩罚

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

4D reconstruction of dynamic positron emission tomography (dPET) data can improve the signal-to-noise ratio in reconstructed image sequences by fitting smooth temporal functions to the voxel time-activity-curves (TACs) during the reconstruction, though the optimal choice of function remains an open question. We propose a spline-residue model, which describes TACs as weighted sums of convolutions of the arterial input function with cubic B-spline basis functions. Convolution with the input function constrains the spline-residue model at early time-points, potentially enhancing noise suppression in early time-frames, while still allowing a wide range of TAC descriptions over the entire imaged time-course, thus limiting bias.Spline-residue based 4D-reconstruction is compared to that of a conventional (non-4D) maximum a posteriori (MAP) algorithm, and to 4D-reconstructions based on adaptive-knot cubic B-splines, the spectral model and an irreversible two-tissue compartment (‘2C3K’) model. 4D reconstructions were carried out using a nested-MAP algorithm including spatial and temporal roughness penalties. The algorithms were tested using Monte-Carlo simulated scanner data, generated for a digital thoracic phantom with uptake kinetics based on a dynamic [18F]-Fluromisonidazole scan of a non-small cell lung cancer patient. For every algorithm, parametric maps were calculated by fitting each voxel TAC within a sub-region of the reconstructed images with the 2C3K model.Compared to conventional MAP reconstruction, spline-residue-based 4D reconstruction achieved >50% improvements for five of the eight combinations of the four kinetics parameters for which parametric maps were created with the bias and noise measures used to analyse them, and produced better results for 5/8 combinations than any of the other reconstruction algorithms studied, while spectral model-based 4D reconstruction produced the best results for 2/8. 2C3K model-based 4D reconstruction generated the most biased parametric maps. Inclusion of a temporal roughness penalty function improved the performance of 4D reconstruction based on the cubic B-spline, spectral and spline-residue models.
机译:通过对正电子发射断层扫描(dPET)数据进行4D重建,尽管功能的最佳选择是通过在重建过程中将平滑的时间函数拟合到体素时间活动曲线(TAC)来改善重建图像序列中的信噪比仍然是一个悬而未决的问题。我们提出了样条残差模型,该模型将TAC描述为具有立方B样条基函数的动脉输入函数卷积的加权和。与输入函数的卷积将在早期时间点限制样条残差模型,可能会增强早期时间范围内的噪声抑制效果,同时仍然允许在整个成像时间过程中进行广泛的TAC描述,从而限制了偏差。将基于残基的4D重建与常规(非4D)最大后验(MAP)算法进行比较,并与基于自适应结立方B样条,频谱模型和不可逆的两组织隔室的4D重建进行比较('2C3K')模型。使用嵌套MAP算法(包括空间和时间粗糙度惩罚)执行4D重建。使用Monte-Carlo模拟扫描仪数据对算法进行了测试,该数据基于非小细胞肺癌患者的动态[ 18 F]-氟嘧啶唑扫描为具有吸收动力学的数字胸模产生。对于每种算法,通过使用2C3K模型拟合重建图像子区域内的每个体素TAC来计算参数图。与传统的MAP重建相比,基于样条残基的4D重建对八个中的五个进行了50%以上的改进为其创建参数图的四个动力学参数的组合以及用于对其进行分析的偏倚和噪声测量,并且与所研究的任何其他重建算法相比,对于5/8组合产生了更好的结果,而基于频谱模型的4D重建产生了2/8的最佳结果。基于2C3K模型的4D重建生成了偏差最大的参数图。基于三次B样条,光谱和样条残差模型,包含时间粗糙度惩罚函数可改善4D重建的性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号