首页> 美国卫生研究院文献>other >Fast Spatial Resolution Analysis of Quadratic Penalized Least-Squares Image Reconstruction with Separate Real and Imaginary Roughness Penalty: Application to fMRI
【2h】

Fast Spatial Resolution Analysis of Quadratic Penalized Least-Squares Image Reconstruction with Separate Real and Imaginary Roughness Penalty: Application to fMRI

机译:二次惩罚最小二乘图像重构的真实和虚假粗糙度惩罚的快速空间分辨率分析:在fMRI中的应用

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Penalized least-squares iterative image reconstruction algorithms used for spatial resolution limited imaging, such as functional magnetic resonance imaging (fMRI), commonly use a quadratic roughness penalty to regularize the reconstructed images. When used for complex-valued images, the conventional roughness penalty regularizes the real and imaginary parts equally. However, these imaging methods sometimes benefit from separate penalties for each part. The spatial smoothness from the roughness penalty on the reconstructed image is dictated by the regularization parameter(s). One method to set the parameter to a desired smoothness level is to evaluate the full width at half maximum (FWHM) of the reconstruction method’s local impulse response. Previous work has shown that when using the conventional quadratic roughness penalty one can approximate the local impulse response using an FFT-based calculation. However, that acceleration method cannot be applied directly for separate real and imaginary regularization. This paper proposes a fast and stable calculation for this case that also uses FFT-based calculations to approximate the local impulse responses of the real and imaginary parts. This approach is demonstrated with a quadratic image reconstruction of fMRI data that uses separate roughness penalties for the real and imaginary parts.
机译:用于空间分辨率受限成像(例如功能磁共振成像(fMRI))的惩罚最小二乘迭代图像重建算法通常使用二次粗糙度惩罚来对重建图像进行正则化。当用于复数值图像时,常规的粗糙度补偿将实部和虚部均等地规则化。但是,这些成像方法有时会受益于每个部分的单独罚款。重建图像上粗糙度损失带来的空间平滑度由正则化参数决定。将参数设置为所需的平滑度的一种方法是评估重建方法的局部脉冲响应的半高全宽(FWHM)。先前的工作表明,当使用常规的二次粗糙度惩罚时,可以使用基于FFT的计算来近似局部脉冲响应。但是,该加速方法不能直接应用于单独的实数和虚数正则化。本文针对这种情况提出了一种快速稳定的计算方法,该方法还使用基于FFT的计算来近似实部和虚部的局部脉冲响应。通过对fMRI数据进行二次图像重建(对实部和虚部使用单独的粗糙度损失)证明了该方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号