首页> 美国卫生研究院文献>Journal of Applied Clinical Medical Physics >Image quality of an investigational imaging panel for use with the imaging beam line cone‐beam CT
【2h】

Image quality of an investigational imaging panel for use with the imaging beam line cone‐beam CT

机译:与成像光束线锥形束CT配合使用的研究成像面板的图像质量

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The purpose of this study was to measure and compare the contrast‐to‐noise ratio (CNR) as a function of dose for the cone‐beam CT (CBCT) produced by the imaging beam line (IBL) for the standard and an investigational imaging panel. Two Siemens Artiste linear accelerators were modified at our institution such that the MV‐CBCT would operate under an investigational IBL. The imaging panel from one of the machines was replaced with an investigational imaging panel. After the modification, a set of CBCT for a large and small phantom consisting of eight tissue‐equivalent inserts was acquired for the standard imager and for the investigational imager with and without the standard copper plate. Ten dose settings for each phantom using the IBL in combination with the standard and investigational imaging panel were acquired. The CNR for each tissue‐equivalent insert was calculated. Resolution measurements in line pairs per mm (lp/mm) of the CBCT for the various imaging panel setups were made. In addition, CBCT images of two patients that were imaged with each panel configuration were displayed for a group of physicians and therapists who were asked to identify the best and worst CBCT for each patient. This was used as a qualitative judge of practical image quality. The CNR of the muscle insert for the large phantom with 1.5 cGy at isocenter was 1.3 for the standard imager, 1.5 for the investigational imager with the copper plate, and 1.9 without the plate. Under the same conditions, the CNR of the trabecular bone insert was 5.9, 7.3, and 9.7, respectively. For the small phantom with the same dose to isocenter, the CNR for muscle was 1.7, 2.1, and 3.3, respectively. For the trabecular bone, the CNR was 8.1, 9.6, and 12.1 respectively. The resolution for 1 cGy at isocenter was 0.37 lp/mm for the standard imager, 0.32 and 0.33 for the investigational imager with and without the copper plate. The qualitative test ranked the CBCT of the investigational imager without the copper plate to be the best image, and the standard imager to be the worst. The investigational imaging panel improves image quality as compared to the standard imager for IBL CBCTs. A 1 cGy IBL CBCT, no matter which imager is used, is sufficient for bony anatomy localization. The investigational imager without the copper plate was judged clinically to produce the best IBL CBCT.PACS numbers: 87.57.Q, 87.57.cj
机译:这项研究的目的是测量和比较由标准成像束线(IBL)和研究成像产生的锥形束CT(CBCT)的剂量的函数的对比度-噪声比(CNR)面板。我们机构对两台Siemens Artiste线性加速器进行了改装,以使MV-CBCT可以在IBL的调查下运行。其中一台机器的成像面板被替换为研究成像面板。修改后,针对标准成像仪以及带有和不带有标准铜板的研究成像仪,获取了一套由八个组织等效插入物组成的用于大型和小型体模的CBCT。使用IBL结合标准和研究成像面板,为每个体模获取了十种剂量设置。计算每个组织等效插入物的CNR。进行了各种成像面板设置的每毫米CBCT线对分辨率测量。此外,还向一组医师和治疗师显示了以每种面板配置成像的两名患者的CBCT图像,这些医师和治疗师被要求确定每位患者的最佳和最差CBCT。这被用作对实际图像质量的定性判断。等距点为1.5 cGy的大型体模的肌肉插入物的CNR,对于标准成像仪为1.3,对于有铜板的研究成像仪为1.5,对于无成像板的1.9。在相同条件下,小梁骨插入物的CNR分别为5.9、7.3和9.7。对于等中心点具有相同剂量的小体模,肌肉的CNR分别为1.7、2.1和3.3。对于小梁骨,CNR分别为8.1、9.6和12.1。对于标准成像仪,等中心点处1 cGy的分辨率为0.37 lp / mm,对于有和没有铜板的研究成像仪,其分辨率为0.32 lp / mm。定性测试将不含铜板的研究型成像仪的CBCT评为最佳图像,而标准成像仪的CBCT则为最差图像。与用于IBL CBCT的标准成像仪相比,研究成像面板可提高图像质量。无论使用哪种成像仪,一个1 cGy IBL CBCT都足以进行骨解剖定位。临床上判断无铜板的研究成像仪可产生最佳IBL CBCT.PACS编号:87.57.Q,87.57.cj

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号