首页> 美国卫生研究院文献>AMB Express >Feasibility study of an alkaline-based chemical treatment for the purification of polyhydroxybutyrate produced by a mixed enriched culture
【2h】

Feasibility study of an alkaline-based chemical treatment for the purification of polyhydroxybutyrate produced by a mixed enriched culture

机译:碱性化学处理提纯混合富集培养物产生的多羟基丁酸酯的可行性研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This study focused on investigating the feasibility of purifying polyhydroxybutyrate (PHB) from mixed culture biomass by alkaline-based chemical treatment. The PHB-containing biomass was enriched on acetate under non-sterile conditions. Alkaline treatment (0.2 M NaOH) together with surfactant SDS (0.2 w/v% SDS) could reach 99% purity, with more than 90% recovery. The lost PHB could be mostly attributed to PHB hydrolysis during the alkaline treatment. PHB hydrolysis could be moderated by increasing the crystallinity of the PHB granules, for example, by biomass pretreatment (e.g. freezing or lyophilization) or by effective cell lysis (e.g. adjusting alkali concentration). The suitability of the purified PHB by alkaline treatment for polymer applications was evaluated by molecular weight and thermal stability. A solvent based purification method was also performed for comparison purposes. As result, PHB produced by mixed enriched cultures was found suitable for thermoplastic applications when purified by the solvent method. While the alkaline method resulted in purity, recovery yield and molecular weight comparable to values reported in literature for PHB produced by pure cultures, it was found unsuitable for thermoplastic applications. Given the potential low cost and favorable environmental impact of this method, it is expected that PHB purified by alkaline method may be suitable for other non-thermal polymer applications, and as a platform chemical.
机译:这项研究专注于研究通过碱性化学处理从混合培养生物质中纯化聚羟基丁酸酯(PHB)的可行性。在非无菌条件下,含PHB的生物质富含乙酸盐。碱处理(0.2 M NaOH)与表面活性剂SDS(0.2 w / v%SDS)一起可以达到99%的纯度,回收率超过90%。 PHB的损失主要归因于碱处理过程中的PHB水解。可以通过增加PHB颗粒的结晶度来缓和PHB水解,例如通过生物质预处理(例如冷冻或冻干)或有效的细胞裂解(例如调节碱浓度)。通过分子量和热稳定性评估通过碱处理的纯化PHB在聚合物中的适用性。为了比较目的,还进行了基于溶剂的纯化方法。结果,当通过溶剂法纯化时,发现由混合富集培养物产生的PHB适合于热塑性应用。尽管碱性方法产生的纯度,回收率和分子量与文献报道的纯培养物生产的PHB值相当,但发现它不适用于热塑性塑料。考虑到该方法的潜在低成本和有利的环境影响,可以预期通过碱性方法纯化的PHB可能适用于其他非热聚合物应用,并可用作平台化学品。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号