首页> 美国卫生研究院文献>Journal of Visualized Experiments : JoVE >Synthesis of Thermogelling Poly(N-isopropylacrylamide)-graft-chondroitin Sulfate Composites with Alginate Microparticles for Tissue Engineering
【2h】

Synthesis of Thermogelling Poly(N-isopropylacrylamide)-graft-chondroitin Sulfate Composites with Alginate Microparticles for Tissue Engineering

机译:海藻酸钠微粒合成热凝胶聚(N-异丙基丙烯酰胺)-接枝软骨素硫酸盐复合材料的组织工程研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Injectable biomaterials are defined as implantable materials that can be introduced into the body as a liquid and solidify in situ. Such materials offer the clinical advantages of being implanted minimally invasively and easily forming space-filling solids in irregularly shaped defects. Injectable biomaterials have been widely investigated as scaffolds for tissue engineering. However, for the repair of certain load-bearing areas in the body, such as the intervertebral disc, scaffolds should possess adhesive properties. This will minimize the risk of dislocation during motion and ensure intimate contact with the surrounding tissue, providing adequate transmission of forces. Here, we describe the preparation and characterization of a scaffold composed of thermally sensitive poly(N-isopropylacrylamide)-graft-chondroitin sulfate (PNIPAAM-g-CS) and alginate microparticles. The PNIPAAm-g-CS copolymer forms a viscous solution in water at RT, into which alginate particles are suspended to enhance adhesion. Above the lower critical solution temperature (LCST), around 30 °C, the copolymer forms a solid gel around the microparticles. We have adapted standard biomaterials characterization procedures to take into account the reversible phase transition of PNIPAAm-g-CS. Results indicate that the incorporation of 50 or 75 mg/ml alginate particles into 5% (w/v) PNIPAAm-g-CS solutions quadruple the adhesive tensile strength of PNIPAAm-gCS alone (p<0.05). The incorporation of alginate microparticles also significantly increases swelling capacity of PNIPAAm-g-CS (p<0.05), helping to maintain a space-filling gel within tissue defects. Finally, results of the in vitro toxicology assay kit, 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) and Live/Dead viability assay indicate that the adhesive is capable of supporting the survival and proliferation of encapsulated Human Embryonic Kidney (HEK) 293 cells over 5 days.
机译:可注射生物材料被定义为可作为液体引入体内并在原位固化的可植入材料。此类材料具有微创植入且易于在不规则形状的缺陷中形成空间填充固体的临床优势。可注射生物材料已被广泛研究为组织工程的支架。但是,为了修复体内某些承重区域,例如椎间盘,支架应具有粘合性能。这将使运动过程中脱臼的风险降到最低,并确保与周围组织的紧密接触,提供足够的力传递。在这里,我们描述了由热敏聚(N-异丙基丙烯酰胺)-接枝硫酸软骨素(PNIPAAM-g-CS)和藻酸盐微粒组成的支架的制备和表征。 PNIPAAm-g-CS共聚物在室温下在水中形成粘性溶液,藻酸盐颗粒悬浮在其中以增强附着力。高于最低临界溶液温度(LCST)(约30°C),该共聚物在微粒周围形成固体凝胶。我们采用了标准的生物材料表征程序,以考虑到PNIPAAm-g-CS的可逆相变。结果表明,将50或75 mg / ml海藻酸盐颗粒掺入5%(w / v)PNIPAAm-g-CS溶液中,使单独PNIPAAm-gCS的粘合拉伸强度增加四倍(p <0.05)。藻酸盐微粒的掺入还显着提高了PNIPAAm-g-CS的溶胀能力(p <0.05),有助于在组织缺损处维持凝胶填充。最后,体外毒理学检测试剂盒的结果是2,3-双-(2-甲氧基-4-硝基-5-磺基苯基)-2H-四唑基-5-甲酰苯胺(XTT)和活/死活力分析粘合剂能够支持封装的人胚肾(HEK)293细胞在5天内存活和增殖。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号