首页> 美国卫生研究院文献>Molecules >Duodenoscope-Associated Infections beyond the Elevator Channel: Alternative Causes for Difficult Reprocessing
【2h】

Duodenoscope-Associated Infections beyond the Elevator Channel: Alternative Causes for Difficult Reprocessing

机译:与十二指肠镜相关的电梯通道以外的感染:难以再处理的其他原因

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Objectives: Duodenoscopes have been widely used for both diagnostic and therapeutic endoscopic retrograde cholangiopancreatography (ERCP) procedures, but recently, numerous outbreaks of multidrug-resistant organisms (MDRO) infections have been reported which has led to extensive research for their possible causes. Consequently, the aim of this study is to search for possible duodenoscope surface damages that could provide an alternative and plausible source of infections. Materials and Methods: In order to assess both outer and inner surfaces, a duodenoscope was dismantled and samples were taken from the outer resin polymer and from the air/water, elevator, and working (biopsy) channels that were characterized by FTIR, DSC, TGA, AFM, SEM techniques and the antimicrobial activity were tested. Results: Alterations were noticed on both the coating and working channel polymers, with external alterations increasing progressively from the proximal sample to the distal sample near the tip of the scope. However, the results showed that the coating surface was still efficient against bacterial adhesion. Changes in surface texture and also morphological changes were shown. Conclusions: The study describes the impact of routine procedural use and reprocessing cycles on the duodenoscope, showing that these may possibly make it susceptible to bacterial contamination and MDRO biofilm formation due to difficult reprocessing of the altered surfaces.
机译:目的:十二指肠镜已被广泛用于诊断和治疗性内镜逆行胰胆管造影术(ERCP),但是最近,已报道了许多爆发的多药耐药生物(MDRO)感染,因此对其可能的原因进行了广泛的研究。因此,本研究的目的是寻找十二指肠镜可能造成的表面损伤,以提供替代的,合理的感染源。材料和方法:为了评估外表面和内表面,拆除了十二指肠镜,并从外树脂聚合物以及以FTIR,DSC为特征的空气/水,升降机和工作(活检)通道中取样,测试了TGA,AFM,SEM技术和抗菌活性。结果:在涂层和工作通道聚合物上都发现了变化,外部变化从近端样品向内窥镜尖端附近的远端样品逐渐增加。但是,结果表明,涂​​层表面仍然有效抵抗细菌粘附。显示了表面纹理的变化以及形态变化。结论:该研究描述了常规程序使用和再处理周期对十二指肠镜的影响,表明由于改变后的表面难以再处理,这些操作可能使其易于受到细菌污染和MDRO生物膜形成的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号