“十一五”以来,河南油区投入开发的聚合物驱单元在注聚前均已进入特高含水期,在驱替过程中如何最大限度地提高对应油井的见效比例、见效厚度及增油倍数,是聚合物驱动态调整的难点.应用油藏工程、数值模拟、矿场试验等方法,研究了聚合物驱动态调整的政策界限,并针对聚合物驱的不同见效阶段、影响油井见效的因素等,探讨了改善聚合物驱效果的过程控制技术,包括合理配液配注、边水控制、注聚质量浓度差异调整、聚合物窜流控制、长期封堵高含水层评价动用以及聚合物驱适度提液技术.将这6项技术应用于双河油田北块H3Ⅳ1-3层系,取得显著效果,实际增油降水效果好于数值模拟预测,在注入孔隙体积倍数为0.56时,采收率提高了2.83％.%Since the start of "Eleventh Five-Year Plan", the polymer flooding units in Henan oilfield have been in ultra-high water cut stage before injecting polymer, which has resulted in longer responding time. It is the key to maximize the proportion of effective corresponding wells, effective thickness and effective multiples in dynamically adjustment of polymer flooding. With methods of reservoir engineering, numerical simulation and field test, policy limits of polymer flooding dynamic adjustment are studied in this paper. Also, according to different stages of responding of polymer flooding and different factors that affect the performance of corresponding wells, the process control technology of improving the effect of polymer flooding is studied, including reasonable production and injection rate allocation technology, edge water control technology, polymer concentration differences adjustment technology, polymer channeling control technology, long term closure layer with high water cut evaluation and utilization technology and polymer flooding moderate extracting technology. The effect of application of the six process control technology in Shuangbei H3Ⅳ 1-3 series of strata is significant and the effect of actual oil increase is better than numerical simulation forecast. When 0.56 PV polymer is injected into the reservoir, it can improve recovery by 2.83%.
展开▼
