• 主题
高级搜索  >
历史搜索 清空历史
您现在的位置：首页> 中文期刊>军事科技>工业技术>兵工学报（英文版）

兵工学报（英文版）

兵工学报（英文版）

Journal of China Ordnance
本刊以反映我国兵工战线科学技术的最新成果为主要特色，主要内容为兵器科学技术基础理论研究、试验技术与研究、工程制造技术与研究等。
  • 发文量：1178
  • 被引量：125
  • H指数：2
  • 开始收录时间：
  • CNKI综合因子：
  • 维普期刊影响因子：
  • 万方期刊影响因子：
  • 创刊时间：
  • 国内刊号/CN：11-5282/TJ
    国际刊号/ISSN：1672-002X
  • 发行周期：季刊
    邮发代号：
  • 主管单位：中国科学技术协会
    主办单位：中国兵工学会
兵工学报（英文版）-联系信息
  • 主编：冯长根
  • 电话：010-68964830
  • 邮箱：defence001@163.com
  • 地址：
  • 邮编：100089
兵工学报（英文版）-获奖情况
  • 暂无获奖信息
  • 收录汇总
  • 刊内文献检索
  • 投稿信息

刊期浏览

相关中文期刊

相关中文会议

最新期刊

热门期刊

兵工学报（英文版） >2021年第6期

学科

年度

全选（0）
排序：
共4384条结果
  • 摘要：The depth of penetration(DOP)method is a well-known ballistic test method for characterisation and ranking of ceramic armour materials.The ceramic tile is bonded to a backing material of semi-infinite thickness,and the penetration depth of the projectile gives a measure of the performance of the ceramic.There is,however,an inherent variability in the results from this test method.In this work,the accuracy and the variability of the DOP method has been investigated in a round robin exercise.Six ballistic test centres took part in the exercise.A test protocol was developed,in which the threat type(projectile and impact conditions)and a procedure on how to prepare the targets were specified.The targets consisted of alumina tiles of two different thicknesses that were bonded to polycarbonate backing cubes.Two different 7.62 mm armour piercing projectiles were employed;one with a hard steel core and one with a tungsten carbide core.The projectiles and the other materials all came from single material batches in order to avoid batch-to-batch variations in material properties.These materials were distributed between the ballistic test centres.The test results of the different ballistic test facilities were collected and compared.There was not a lot of variation between the average DOP values obtained at each laboratory,but the variation in penetration depth between shots was high.The consequence of this variation may be less confidence in the test results,and a statistical method was used to evaluate the required number of tests that are sufficient to obtain an average result with high confidence.In most cases,the required number of tests is much higher than what is practically feasible.This work was conducted as part of the European Defence Agency-project CERAMBALL.
  • 摘要：Nanotechnology has played an influential role in improving the energetic content without subsiding the performance of high energy materials in the current era.In this work,HMX(octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine)nanoparticles were prepared by sonochemically assisted solvent-antisolvent spray technique focussing the reduction in its size so as to improve its energetic properties.In order to fabricate nano HMX various parameters such as different solvents and temperature were investigated.Sonication is one of the strategies recently explored in this regard;so time dependent study of sonication using probe sonicator was performed.It has been postulated that bubble formed during sonication when collapses generate high temperature and many nucleation sites which leads to the formation of uniform spherical particles with small size and fast transition phase.XRD studies depicted phase transformation from a toβas a result of sonication.The TEM images revealed that the rise in the sonication time resulted into decrease in the particle size from 300 to 10 nm.Differential scanning calorimetry(DSC)was employed to determine the heat release of the samples and enhancement in the heat release with the decrease in the particle size.A decrease in the spark sensitivity was observed from 2 J(regular HMX)to 50 mJ(nano HMX).
  • 摘要：To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive,an explosion device was developed and used to investigate the detonation pressure and temperature of R1(A16)aluminum powder and the aluminum powder particle gradation of R2(Al6+Al13),R3(Al6+Al24)and R4(Al6+AI flake)in a confined space.By using gas chromatography,quantitative analysis and calculations were carried out to analyze the gaseous detonation products.Finally,the reaction ratios of the aluminum powder and the explosion reaction equations were calculated.The results show that in a confined space,the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum.In vacuum,the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2,respectively.In air,the quasi-static pressures and equilibrium telperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3,respectively.R4(Al6+AI flake)and R3(Al6+A124)have relatively higher temperatures after detonation,which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by10.6%and 8.0%,respectively.In air,the reaction ratio of AI6 aluminum powder can reach as high as 78.16%,and the reaction ratio is slightly reduced after particle gradation.Finally,the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products,which provides a powerful basis for the study of RDX-based explosive reactions.
  • 摘要：This study investigates the hot machining of Inconel 625 alloy by using flame heating under different machining conditions using finite element analysis(FEM).Turning tests are performed at different cutting speeds and heating temperatures using uncoated carbide insert by DEFORM software.Significant reduction in cutting force and tool wear has achieved at heating conditions compared to room temperature.Highest tool life is achieved at the highest cutting speed and higher heating temperature condition.At heating conditions of the 600℃ continuous chip is formed whereas at room temperature saw-tooth chip formation is observed.A significant agreement is achieved between simulated and experimental cutting forces and chip morphology.The effect of feed rates and depth of cuts are also studied experimentally during turning of Inconel 625 in a systematic manner.
  • 摘要：Based on the characteristic expanded hole of a shaped charge jet(SCJ) for target penetration and the reflow characteristics of liquids,the liquid-filled structure of a target disturbs the stability of the SCJ acquired in two independent parts.The interference jet speed interval,the escape jet speed interval,and the surplus depth are calculated on the basis of the virtual origin theory.The experimental results,including the velocity of the escaped jet tip and the surplus depth of penetration,are consistent with the theoretical results.Experiments show that the theory can describe the interaction process of the target with a shaped charge jet.
  • 摘要：Ammonium perchlorate(APC)is the most common oxidizer in use for solid rocket propulsion systems.However its initial thermal decomposition is an endothermic process that requires 102.5 J·g^-1.This manner involves high activation energy and could render high burning rate regime.This study reports on the sustainable fabrication of CuO nanoparticles as a novel catalyzing agent for APC oxidizer.Colloidal CuO nanoparticles with consistent product quality were fabricated by using hydrothermal processing.TEM micrographs demonstrated mono-dispersed particles of 15 nm particle size.XRD diffractogram demonstrated highly crystalline material.The synthesized colloidal CuO particles were effectively coated with APC particles via co-precipitation by using fast-crash solvent-antisolvent technique.The impact of copper oxide particles on APC thermal behavior has been investigated using DSC and TGA techniques.APC demonstrated an initial endothermic decomposition stage at 242℃ with subsequent two exothermic decomposition stages at 297,8℃ and 452.8℃ respectively.At 1 wt%,copper oxide offered decrease in initial endothermic decomposition stage by 30%.The main outcome of this study is that the two main exothermic decomposition peaks were merged into one single peak with an increase in total heat release by 53%.These novel features can inherit copper oxide particles unique catalyzing ability for advanced highly energetic systems.
  • 摘要：Polyurea is widely employed as a protective coating in many fields because of its superior ability to improve the anti-blast and anti-impact capability of structures.In this study,the mechanical properties of polyurea XS-350 were investigated via systematic experimentation over a wide range of strain rates(0.001-7000 s^-1)by using an MTS,Instron VHS,and split-Hopkinson bars.The stress-strain behavior of polyurea was obtained for various strain rates,and the effects of strain rate on the primary mechanical properties were analyzed.Additionally,a modified rate-dependent constitutive model is proposed based on the nine-parameter Mooney-Rivlin model.The results show that the stress-strain curves can be divided into three distinct regions:the linear-elastic stage,the highly elastic stage,and an approximate linear region terminating in fracture.The mechanical properties of the polyurea material were found to be highly dependent on the strain rate.Furthermore,a comparison between model predictions and the experimental stress-strain curves demonstrated that the proposed model can characterize the mechanical properties of polyurea over a wide range of strain rates.
  • 摘要：Among many condition-monitoring systems in welding operation,Defect identification is an important method to ensure the precision in finishing operation.Friction stir welding is a solid state welding process used to join two metals without the use of electrode at lower temperatures.The aim of this present work is to identify and localize the tunnel defect in aluminum alloy and measure the distance of the defect zone in the time domain of the vibration signal during Friction stir welding.The vibration signals are captured from the experiments and the burst in the vibration signal is focused in the analysis.A signal-processing scheme is proposed to filter the noise and to measure the dimensional parameters of the defect area.The proposed technique consists of discrete wavelet transform(DWT),which is used to decompose the signal.The enveloping technique is applied on the decomposed zero padded signal.The continuous wavelet transform(CWT) has been implemented on detailed signal followed by a time marginal integration(TMI) of the CWT scalogram.Empirical mode decomposition(EMD) is used to replace the detailing coefficients from DWT with Intrinsic Mode Function(IMF).Statistical parameters such as mean,kurtosis,S.D and crest factor have been extracted from the final filtered signal for validating the defect welds from the control defect free welds.Results produced were found to be that kurtosis is 7.4402 for tunnel defect induced weld and 3.3862 for defect free welds.As the increase in kurtosis value predicts the defect zone impact in the signal.The measurement of the defect zone of the cut 1(voids) and cut 2(tunnel grooves) in correlation with the processed signal is found to produce a much redundant results with an error rate of 0.02.
  • 摘要：Low velocity impact experiments were carried out on E-glass/epoxy composite laminates having varying thicknesses at sub zero and elevated temperatures using hemi spherical steel impactor of 16 mm diameter with impact energies in the rage of 50-150 J.The performance of the laminates was assessed in terms of energy absorption,maximum displacement,peak force and failure behaviour.Results indicated that the effect of temperature on energy absorption of the laminate is negligible although the laminates are embrittling at sub zero temperatures.However it has influence on failure behaviour and displacement.Peak force has increased linearly with increase in laminate thickness from 5 to 10 mm.However it got reduced by 25% when temperature was increased from-20℃ to 100℃,Based on experimental results,laminate perforation energies were predicted using curve fitting equations.Statistical analysis was carried out using Taguchi method to identify the global effects of various parameters on laminate performance and confirmed that the laminate thickness has significant influence as compared to temperature,for the studied range.
  • 摘要：In view of that existing opening technologies of front cover for rocket launch canister have disadvantages such as causing damage on the ground equipment,not being reused and easily broken.A novel reusable non-separation spring-driven opening scheme is proposed to achieve rapid and reliable opening of the front cover.The mathematical model of the opening process of the front cover is established by the rigid body dynamics theory.To establish a response surface model to optimize the opening scheme,three main influencing factors of the opening process are obtained through the designed experiments,including the pre-compression,the stiffness of the thrust spring,and the thrust spring force arm length.In addition,the prescribed kinematic law was taken as constraint,and the smaller thrust spring preliminary pressure and angular velocity was taken as optimization expectations.The results show that the opening scheme meets the design requirements on opening process well.It also shows that the optimized scheme can reduce the kinetic energy of the front cover,and the impact on the canister effectively,achieving a reliable and rapid opening of the front cover.
  • 摘要：This paper gives a succinct review of dual-spinprojectile stability and some technologies relating to them.It describes how the traditional stability factors from linear projectile theory are modified to better describe a controlled dual-spin projectile.Finally,it reviews works which have investigated how different aspects of a controlled dual-spin design can affect flight stability,primarily airframe structure and canard properties.A conclusion is given,highlighting important guidelines from the enclosed discussions.
  • 摘要：Electric spark energy,E_(ES),for a 50%probability of initiation of the 14 nitramines was determined using a measuring instrument in which the electrodes are in direct contact with the sample.Indirectly proportional relationships were established between the logarithm of the E_(ES)values and the length of the longest N-N bond in the nitramine molecule.This finding is compatible with the mechanism of the first step in the electro-reduction of the nitramine grouping.Directly proportional relationships were found to exist between the E_(ES)values and the crystal lattice free volumes,ΔV(i.e.an increase in theΔV values increases the nitramine's resistance to electric sparks)but there were several nitramines with the opposite course of this relationship.Also a semilogarithic relationships between the E_(ES)values and a ratio of intrinsic volumes of molecule,V_(int),to theΔV values were described as well as ambiguous linear dependence between these energies and a sum of the positive and negative extremes of the molecular surface electrostatic potentials,V_(S,∑).Several nitramines studied(always the same ones)display roughly the same distribution in the coordinate systems of relationships with lengths of the longest N-N bonds,the Vint/ΔV ratio and the sum V_(S,∑)as the independent variables.It was found that,typically,such relationships start from a single identical point,in effect a point corresponding to data for a structural unit from which tho studied nitramines can be hypothetically generated,and/or are converging on another point,often the one corresponding to the data for HNIW.All the findings point to a fundamental influence of the intermolecular forces on reactivity of nitramines exposed to electric sparks.
  • 摘要：Under the background of vigorously developing facilities of island/reef in the world,the economic value and strategic significance of the island/reef have become increasingly important.Unfortunately,they may easily become the attacking target of missiles in the war time.Therefore,aiming at the damage quantification of the targets in the island/reef under the missile attacking,a macroscopic damage assessment model for the target area is proposed in this paper.The model focuses on the construction of the assessment model framework.Firstly,the analytic hierarchy process and the grey relational analysis are applied to measure the importance of each target in the region through four indicators of the target hazard,striking urgency,damage advantage and mission relevance,respectively.Secondly,based on the damage mechanism of shock wave and fragments to target,the corresponding damage model is established,and the damage grade of each target in the evaluated area is obtained according to the damage criteria and grading standard.Finally,the model obtains the overall damage grade of the target area by employing the fuzzy comprehensive evaluation method,with synthesizing the importance and the damage grade of each target.Through the verification of an example,it demonstrates the certain feasibility of the model and provides a certain basis and reference for the subsequent research.
  • 摘要：The paper presents the investigation of the effect of alkaline treatment of sodium hydroxide(NaOH) on physical and dynamic mechanical analysis(DMA) viscoelastic properties of kenaf fibre filled natural rubber(NR)/thermoplastic polyurethane(TPU) composites.The treated kenaf fiber,NR and TPU were weighed and proportioned according to the required compositions and were blended using hot mixed Brabender machine.The polymer composites were then fabricated using the hot press to form a sample board.The sample was cut and prepared and water absorption,density,thickness swelling and DMA tests were performed.As far as physical properties are concerned,composites with the highest NR amount of shows the best results,which indicates good fiber bonding adhesion.The polymer composites with the highest amount of TPU shows the highest damping properties at high temperature.
  • 摘要：Ballistic impact induces complex stress states on fiber-based armor systems.During impact fibers undergo multiaxial loading which includes axial tension,axial compression,transverse compression,and transverse shear.Transverse co mpression induced by the projectile leads to permanent defo rmation and fibrillation of fibers resulting in degradation of material tensile strength.Previous work(Sockalingam et al.Textile Res.J 2018) has shown a reduction of 20% in the tensile strength of Dyneema~? SK76 single fibers subjectet to 77% nominal transverse compressive strains.Experimental investigation of quasistatic transverse compression on Dyneema~? SK-76 yarns,unconstrained in the lateral direction,indicate an average of 4% reduction in tensile strength of yarns compressed to 77% nominal strains.In this work we use finite element modeling techniques to understand the difference in residual tensile strength between single fibers and yarns observed in laterally unconstrained transverse compression experiments.Finite element study of the transverse compression response of single fibers and yarns indicate that local strains developed in fibers within the yarn are much lower than the local strains developed in single fibers subjected to a given nominal strain and may explain the less reduction in strength observed in yarns.
  • 摘要：The temperature difference between the exposed surface of an underground silo and the surrounding soil surface is significant,which means a silo can be easily found by infrared detection.We designed an infrared camouflage cloak consisting of an imitative layer and an insulation layer for the silos.The imitative layer is used to imitate the thermal response of the soil to the surrounding environment.The insulation layer is used to weaken the impact of the internal temperature field of the silo on the lower boundary of the imitative layer.A silo model including surrounding soil and a soil model without silo were established,and the influences of the material and thickness of each layer on the infrared camouflage effect were analyzed.The results show that when using a silicone rubber containing alumina powder with a volume fraction of 3.18% as the imitative material,its thermal inertia is in consistent with that of the soil.Meanwhile,it was found that the thickness of the imitative layer doesn't need to be greater than its thermal penetration depth to achieve the infrared camouflage,and the absence of the insulation layer will cause hot spots on the silo surface in winter to weaken the camouflage effect.The optimized thicknesses of the imitative layer and the insulation layer are 22 cm and 4 cm re spectively.The simulations indicate that with the application of the cloak,the maximum value of the absolute values of the temperature differences between the average temperatures of the silo surface and the surrounding soil surface temperatures drops from 1,59℃ to 0.31℃ in summer and from 1.92℃ to 0.21℃ in winter.This designed cloak can achieve an all-weather and full-time passive infrared camouflage.

    兵工学报（英文版）的期刊信息

    • 曾用名：
    • 创刊时间：
    • 地区：
    • 语言：中文
    • 热门主题：
    • 学科分类：

    兵工学报（英文版）的获奖情况

    兵工学报（英文版）的收录情况

    • 中国科技论文与引文数据库 (2019)
    • 中国科技论文与引文数据库 (2018)
    • 中国科技论文与引文数据库 (2017)
    • 中国科技论文与引文数据库 (2016)
    • 美国《工程索引》 (2019)
    • 美国《工程索引》 (2018)
    • 美国《科学引文索引》 (2019)

    兵工学报（英文版）的投稿信息

    • 投稿方式：
    • 投稿须知：点击查看
    • 期刊官方网站：点击前往
    • 版面费：
    • 审稿费：元
    • 通讯地址：
    • 邮编：100089
    • 联系电话：010-68964830
    • 邮箱：defence001@163.com
    • 期刊栏目：论文
    免费订阅本刊

    客服邮箱：kefu@zhangqiaokeyan.com

    京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有 出版物经营许可证

    • 客服微信

    • 服务号