17Ni/(10NiO-NiFe2O4) cermet materials were fabricated by cold pressing sintering method in different atmospheres, and their phase composition, microstructure and mechanical properties were also studied.The results show that 17Ni/(10NiO-NiFe2O4) cermet can be obtained by sintering in low vacuum or atmosphere with oxygen content (volume fraction) of 2 × 10-5, 2 × 10-4, 2 × 10-3 and 1 × 10-2, and the oxygen content affects on the phase composition of materials greatly.Cermet tends to have a high content ofNiO sintered in atmosphere with low oxygen content, and a high content of metallic phase sintered in atmosphere with high content of oxygen.When the oxygen content of atmosphere amounts is 2× 10-4, the grain size of 17Ni/(10NiO-NiFe2O4) cermet is 2.477 μm, and bending strength is 116.55 MPa,which can withstand 7 times of thermal shock tests at 960 ℃.%采用冷压一烧结法在不同的烧结气氛下制备17Ni/(10NiO-NiFe2O4)金属陶瓷,并研究材料的物相组成、显微结构及力学性能.研究结果表明;在低真空及氧体积分数分别为2×10-5,2×10-4,2×10-3和1×10-2的气氛中均可获得17Ni/(10NiO-NiFe2O4)金属陶瓷,但气氛中氧体积分数对各组成物相的质量分数影响较大,在低氧体积分数时NiO含量相对较高,高氧质量分数时金属相质量分数相对较高;当烧结气氛中氧体积分数为2×10-4时,可获得晶粒尺寸为2.477 μm的17Ni/(10NiO-NiFe2O4)金属陶瓷,其抗弯强度可达116.55 MPa,在960℃下抗热震循环数可达7次,具有较好的力学性能.
展开▼
