An asymmetric non-fused electron-deficient building block for low-cost polymer acceptor in all-polymer solar cells

摘要

The development of polymerized fused-ring small molecule acceptors(FRA-PAs) has boosted the performance of all-polymer solar cells(all-PSCs).However,these FRA-PAs suffer from lengthy synthesis steps and high production costs due to the high degree of synthetic complexity for fused-ring small molecule acceptors(FRAs).Furthermore,most FRA-PAs exhibit strong batch-to-batch variation,limiting further industrial applications.Herein,we designed and synthesized asymmetric non-fused electron-deficient building block TIC-Br with a simple structure(only three synthetic steps),showing a planar configuration,excellent electron affinity,and large dipole moment.A simple polymer acceptor PTIB was further developed by polymerization of TIC-Br and sensitized fluorinated-thienyl benzodithiophene(BDT-TF-Sn).PTIB exhibits a broad absorption from 300 to 800 nm,a suitable lowest unoccupied molecular orbital(LUMO) energy level of-3.86 e V,and moderate electron mobility(1.02×10^(-4)cm^(2)V^(-1)s^(-1)).When matched with PM6,the device achieved the best PCE of 10.11%with a high V_(OC) of 0.97 V,which is one of the highest among those reported all-PSCs.More importantly,PTIB exhibits a lower synthetic complexity index(SC=35.0%)and higher figure-of-merit values(FOM=29.0%) than all the reported high-performance PAs.The polymer also exhibits excellent batch-to-batch reproducibility and great potential for scale-up fabrication.This study indicates that TIC-Br is a promising building block for constructing low-cost polymer acceptors for large-scale applications in all-PSCs.