The contact sti ness of a mechanical bonding surface is an important parameter in determining the normal and radial contact force. To improve the calculation accuracy of the contact force model, the surface roughness of the bonding surface and the energy loss that necessarily occurs during the impact process should be considered com?prehensively. To study the normal contact force of a revolute joint with clearance more accurately in the case of dry friction, a nonlinear sti ness coe cient model considering the surface roughness was established based on fractal theory, which considers the elastic, elastic?plastic, and plastic deformations of the asperities of the contact surface during the contact process. On this basis, a modified nonlinear spring damping model was established based on the Lankarani–Nikravesh contact force model. The laws influencing the surface roughness, recovery coe cient, initial velocity, and clearance size on the impact force were revealed, and were compared with the Lankarani–Nikravesh model and a hybrid model using MATLAB. The maximum impact force was obtained using a modified contact force model under di erent initial velocities, di erent clearances, and di erent degrees of surface roughness, and the calculated results were then compared with the experiment results. This study indicates that the modified model can be used more widely than other models, and is suitable for both large and small clearances. In particular, the modified model is more accurate when calculating the contact force of a revolute joint with a small clearance.
展开▼
机译:Book Review:Contacts and Contrasts in Cultures and Languages:Edited by Barbara Lewandowska-Tomaszczyk,Springer(2019)Switzerland pp.233 ISBN 978-3-030-04981-2
机译:Influence of Heat Exchange Coefficients on Both Optimized Thermal Contact (OTCR) and Critical (CTCR) Resistances at the Contact Interface of a Flat Concrete Slab and a Rice Straw Board