The microstructure and mechanical properties of cast inserted dies for automobile covering components were studied. The results show that the as-cast microstructures of cast inserted dies are composed of pearlite, martensite, bainite, and austenite; and that the annealed microstructure is granular pearlite. The mechanical properties of cast inserted dies approach that of forged inserted dies. The tensile strength is 855 MPa, the elongation is 16%, the impact toughness is 177 J/cm2, and the hardness after annealing and quenching are HRC 19 and HRC 60-62. In addition, the cast inserted dies have good hardenability. The depth of the hardening zone and the hardness after flame quenching satisfy the operating requirements. The cast inserted dies could completely replace the forged inserted dies for making the dies of automobile covering components.
展开▼
机译:Study on Risk Management of Epidemic Prevention in High Rise Residential Areas of Urban Community from the Perspective of COVlD-19: A Case Study of L Community in Handan City
机译:Qualitative and Comparative Study of Different Methods of Interpolation for the Mapping of Groundwater Salinity: Case Study of Thermal Waters Used for Irrigation in Northeastern Algeria
机译:如何发展银行品牌形象-以专注于财富管理业务的远东国际商业银行为例 =The Study of the Development of Bank’s Brand Image- A Case Study of Far Eastern Int’l Bank Targeting on Wealth Management