首页> 外文学位 >The Investigation of ZnO/ Poly(vinylidene) Fluoride Nanocomposites for Orthopedic Applications with Improved Mechanical, Piezoelectric, and Antimicrobial Properties
【24h】

The Investigation of ZnO/ Poly(vinylidene) Fluoride Nanocomposites for Orthopedic Applications with Improved Mechanical, Piezoelectric, and Antimicrobial Properties

机译:具有改善的机械,压电和抗菌性能的用于骨科应用的ZnO /聚偏二氟乙烯纳米复合材料的研究

获取原文
获取原文并翻译 | 示例

摘要

Many studies have shown that piezoelectric materials can be used as bioactively charged surfaces to enhance cell functions and result in tissue regeneration (such as nerve injury repair, bone formation, wound healing, and more). Poly(vinylidene) fluoride (PVDF) and zinc oxide (ZnO) are regarded as potential bone tissue engineering materials because of their many attractive properties including biocompatibility, high piezoelectricity and good mechanical properties. ZnO nanoparticles (NPs) are also well known for their antibacterial properties, in which infection is a growing concern in orthopedics. In this study, PVDF scaffolds doped with crystalline ZnO NPs (termed ZnO/PVDF) were prepared by electrospinning, followed by chemical characterization via Fourier Transform Infrared Microscopy (FTIR). Additionally, their piezoelectric and mechanical properties were also evaluated. In vitro osteoblast (or bone forming cells) assays were performed to determine material cytotoxicity and bone regrowth potential. Staphylococcus aureus (SA), Methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli) bacteria were also seeded and counted to evaluate scaffold antimicrobial properties. Results of this study showed for the first time significantly reduced E. coli, SA and MRSA density on ZnO/PVDF scaffolds when using 2 or 1 mg/ml of ZnO in PVDF composites compared to pure PVDF scaffolds (controls) in 6 hours culture. Compared to controls and non-piezo excited samples, osteoblast density was 30% greater when scaffolds were piezo-excited in 1 and 3 days cell culture. Significantly decreased bacteria (E. coli, SA and MRSA) density and increased osteoblast density on the piezoelectric stimulated ZnO/PVDF scaffolds demonstrated that these scaffolds have a strong potential for antibacterial orthopedic applications, especially considering that bacteria growth was minimized without using antibiotics and, thus, this approach does not contribute to the growing problem of antibiotic-resistance bacteria troubling medicine today. Moreover, with an increased beta phase ratio in PVDF, enhanced mechanical properties also indicated that the ZnO/PVDF scaffolds can be considered as an orthopedic implant material or used for other mechanical and electrical applications with greater efficiency than what may be presently available.
机译:许多研究表明,压电材料可以用作带生物活性的表面,以增强细胞功能并导致组织再生(例如神经损伤修复,骨形成,伤口愈合等)。聚偏二氟乙烯(PVDF)和氧化锌(ZnO)被认为是潜在的骨组织工程材料,因为它们具有许多吸引人的特性,包括生物相容性,高压电性和良好的机械性能。 ZnO纳米颗粒(NPs)也因其抗菌特性而闻名,其中感染在整形外科中正日益引起关注。在这项研究中,通过电纺丝制备了掺杂有结晶ZnO NPs的PVDF支架(称为ZnO / PVDF),然后通过傅里叶变换红外显微镜(FTIR)进行了化学表征。另外,还评估了它们的压电和机械性能。进行体外成骨细胞(或骨形成细胞)测定以确定材料的细胞毒性和骨再生潜力。还接种了金黄色葡萄球菌(SA),耐甲氧西林的金黄色葡萄球菌(MRSA)和大肠杆菌(E. coli)细菌,并计数以评估支架的抗菌特性。这项研究的结果首次显示,与纯PVDF支架(对照)在6小时培养中相比,在PVDF复合材料中使用2或1 mg / ml ZnO时,ZnO / PVDF支架上的大肠杆菌,SA和MRSA密度显着降低。与对照组和非压电激发的样品相比,在第1天和第3天的细胞培养中压电激发支架后,成骨细胞的密度增加了30%。压电刺激的ZnO / PVDF支架上细菌(大肠杆菌,SA和MRSA)的密度显着降低和成骨细胞密度的增加表明,这些支架具有强大的潜力,可用于矫形抗菌手术,特别是考虑到不使用抗生素就可以使细菌的生长最小化,并且因此,这种方法并不能解决当今日益增加的耐药性细菌困扰医学的问题。此外,随着PVDF中β相比率的增加,机械性能的增强也表明ZnO / PVDF支架可以被视为整形外科植入材料,或以比目前可用的更高的效率用于其他机械和电气应用。

著录项

  • 作者

    Li, Yuan.;

  • 作者单位

    Northeastern University.;

  • 授予单位 Northeastern University.;
  • 学科 Chemical engineering.;Biomedical engineering.;Bioengineering.
  • 学位 M.S.
  • 年度 2017
  • 页码 73 p.
  • 总页数 73
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号