首页> 外文学位 >Prediction of the aerodynamic characteristics of wings and bodies in coning motion
【24h】

Prediction of the aerodynamic characteristics of wings and bodies in coning motion

机译:圆锥运动中机翼和机体的空气动力特性预测

获取原文
获取原文并翻译 | 示例

摘要

An unsteady, wing-following, wake-shedding vortex-lattice scheme has been developed to predict the aerodynamic forces and moments experienced by single and multi-wing configurations during coning motion. A computer code, based on the vortex-lattice scheme, has been developed and used to model the lifting-surface configuration of the F-15 fighter aircraft, consisting of the main wing, the tailplane and the two fins, in coning motion. Results have been obtained for incidences up to 35°, and coning rates up to 0.7. Comparisons made between these and experimental results of the F-15 aircraft, including the body, reveal reasonable agreement between the magnitudes and trends of the computed and experimental force and moment coefficients up to 20° incidence. However, further increase in incidence shows considerable deterioration in the accuracy of the computed results, which is attributed to wing stall and increased body influence. Neither of these effects are not taken into account in the calculation of the results. Additionally, the vortex-lattice scheme has been used to investigate the interaction between various surfaces of the F-15 configuration in coning motion. The importance of wake rollup modelling in coning motion has also been studied. A calculational procedure, based on Total Incidence Plane Aerodynamics, has also been developed in order to synthesise the aerodynamic characteristics of a circular cross-sectioned ogive cylinder in coning motion. The procedure uses nonrotary experimental data to synthesise the rotary force and moment coefficients. Comparisons made between the synthesised results and those obtained from experiment indicate that the proposed calculational procedure can be successfully implemented to determine the trends in the force and moment variations with coning rate of an ogive cylinder. The procedure has also been used to investigate the effect of coning rate and coning point location on the local and overall forces and moments of an ogive cylinder. Finally, the proposed calculational procedure has been implemented to synthesise the lateral aerodynamic coefficients of the forebody section of the F-15 and the High Incidence Research Model (HIRMII) in coning motion. The reasonably good agreement found between the synthesised coefficients and the experimental coefficients of the entire vehicle indicates that, in coning motion at high angles of attack, the long and slender forebody section of a modern fighter aircraft, or a missile, plays a major role in determining the overall lateral aerodynamic characteristics of the vehicle.
机译:已经开发了一种不稳定的,跟随机翼的,尾流脱落的涡流格子方案,以预测锥运动中单翼和多翼构型所经历的空气动力和力矩。已经开发出了基于涡格子方案的计算机代码,并将其用于模拟F-15战斗机在圆锥运动中由主翼,尾翼和两个鳍片组成的升力面构型。入射角高达35°,锥角率高达0.7,已获得结果。对F-15飞机(包括机体)的这些结果与实验结果进行的比较表明,计算得出的力和实验力以及直至20°入射角的力矩系数的大小和趋势之间存在合理的一致性。但是,入射角的进一步增加表明计算结果的准确性大大降低,这归因于机翼失速和机体影响的增加。计算结果时不会考虑这些影响。此外,涡旋格方案已被用来研究圆锥运动中F-15构型的各个表面之间的相互作用。还研究了尾流累积建模在圆锥运动中的重要性。还开发了一种基于“总入射平面空气动力学”的计算程序,以便在圆锥运动中合成圆形横截面的圆柱齿轮的空气动力学特性。该程序使用非旋转实验数据来合成旋转力和力矩系数。合成结果与实验结果之间的比较表明,所提出的计算程序可以成功地实现,以确定力和力矩变化的变化趋势与正圆柱体的锥进速率。该程序也已用于研究锥度和锥点位置对原圆柱的局部和整体力及力矩的影响。最后,所提出的计算程序已被执行,以合成F-15的前体部分的横向空气动力系数和圆锥运动中的高发病率研究模型(HIRMII)。在合成系数和整个飞行器的实验系数之间找到的合理良好的一致性表明,在高攻角的圆锥运动中,现代战斗机或导弹的前机身细长的前躯部分起着重要的作用。确定车辆的整体侧向空气动力学特性。

著录项

  • 作者

    Maziat, Reza.;

  • 作者单位

    The University of Manchester (United Kingdom).;

  • 授予单位 The University of Manchester (United Kingdom).;
  • 学科 Aerospace engineering.
  • 学位 Ph.D.
  • 年度 1996
  • 页码 361 p.
  • 总页数 361
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号