首页> 外文学位 >Molecular modeling the microstructure and phase behavior of bulk and inhomogeneous complex fluids.
【24h】

Molecular modeling the microstructure and phase behavior of bulk and inhomogeneous complex fluids.

机译:分子模型对散装和非均质复杂流体的微观结构和相行为进行建模。

获取原文
获取原文并翻译 | 示例

摘要

Accurate prediction of the thermodynamics and microstructure of complex fluids is contingent upon a model's ability to capture the molecular architecture and the specific intermolecular and intramolecular interactions that govern fluid behavior. This dissertation makes key contributions to improving the understanding and molecular modeling of complex bulk and inhomogeneous fluids, with an emphasis on associating and macromolecular molecules (water, hydrocarbons, polymers, surfactants, and colloids). Such developments apply broadly to fields ranging from biology and medicine, to high performance soft materials and energy.;In the bulk, the perturbed-chain statistical associating fluid theory (PC-SAFT), an equation of state based on Wertheim's thermodynamic perturbation theory (TPT1), is extended to include a crossover correction that significantly improves the predicted phase behavior in the critical region. In addition, PC-SAFT is used to investigate the vapor-liquid equilibrium of sour gas mixtures, to improve the understanding of mercaptan/sulfide removal via gas treating.;For inhomogeneous fluids, a density functional theory (DFT) based on TPT1 is extended to problems that exhibit radially symmetric inhomogeneities. First, the influence of model solutes on the structure and interfacial properties of water are investigated. The DFT successfully describes the hydrophobic phenomena on microscopic and macroscopic length scales, capturing structural changes as a function of solute size and temperature.;The DFT is used to investigate the structure and effective forces in nonadsorbing polymer-colloid mixtures. A comprehensive study is conducted characterizing the role of polymer concentration and particle/polymer size ratio on the structure, polymer induced depletion forces, and tendency towards colloidal aggregation.;The inhomogeneous form of the association functional is used, for the first time, to extend the DFT to associating polymer systems, applicable to any association scheme. Theoretical results elucidate how reversible bonding governs the structure of a fluid near a surface and in confined environments, the molecular connectivity (formation of supramolecules, star polymers, etc.) and the phase behavior of the system.;Finally, the DFT is extended to predict the inter- and intramolecular correlation functions of polymeric fluids. A theory capable of providing such local structure is important to understanding how local chemistry, branching, and bond flexibility affect the thermodynamic properties of polymers.
机译:复杂流体的热力学和微观结构的准确预测取决于模型捕获分子结构以及控制流体行为的特定分子间和分子内相互作用的能力。本论文为改善对复杂的大体积和非均质流体的理解和分子建模做出了重要贡献,重点是缔合和大分子(水,碳氢化合物,聚合物,表面活性剂和胶体)。这样的发展广泛地应用于从生物学和医学到高性能软材料和能源的领域。总体而言,扰动链统计缔合流体理论(PC-SAFT)是基于Wertheim热力学扰动理论的状态方程( TPT1)被扩展为包括一个交叉校正,可以显着改善临界区域中的预测相位行为。此外,PC-SAFT用于研究酸性气体混合物的气液平衡,以增进对通过气体处理去除硫醇/硫化物的理解。对于非均质流体,扩展了基于TPT1的密度泛函理论(DFT)表现出径向对称不均匀性的问题。首先,研究了模型溶质对水的结构和界面性质的影响。 DFT成功地描述了微观和宏观尺度上的疏水现象,捕获了结构变化与溶质大小和温度的函数关系。DFT用于研究非吸附性聚合物-胶体混合物的结构和有效力。进行了全面的研究,表征了聚合物浓度和颗粒/聚合物尺寸比对结构,聚合物诱导的耗尽力和胶体聚集趋势的作用。;首次使用缔合官能团的不均匀形式来扩展DFT用于关联聚合物系统,适用于任何关联方案。理论结果阐明了可逆键如何控制表面附近和受限环境中的流体结构,分子连通性(超分子,星形聚合物等的形成)和系统的相行为。最后,DFT扩展至预测聚合物流体的分子间和分子内相关函数。能够提供这种局部结构的理论对于理解局部化学,支化和键的柔韧性如何影响聚合物的热力学性质很重要。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号