首页> 外文学位 >Synthesis, separation, and reactivities of multidentate phosphine ligands and investigation into dirhodium hydroformylation and hydrocarboxylation catalysis.
【24h】

Synthesis, separation, and reactivities of multidentate phosphine ligands and investigation into dirhodium hydroformylation and hydrocarboxylation catalysis.

机译:多齿膦配体的合成,分离和反应性以及对二氢加氢甲酰化和加氢羧化催化的研究。

获取原文
获取原文并翻译 | 示例

摘要

A dirhodium homogeneous hydroformylation catalyst based on a tetraphosphine ligand, rac-Et2PCH2CH 2P(Ph)CH2P(Ph)CH2CH2PEt2, rac-et,ph-P4, is under investigation. The ligand synthesis produces a racemic mixture and a facile and efficient method of separation of the racemic and meso diastereomers was achieved through reaction of et,ph-P4 with two equivalents of NiCl2 in EtOH to yield an almost quantitatively isolable precipitate of meso-Ni 2Cl4(et,ph-P4) and the soluble rac-Ni 2Cl4(et,ph-P4). Subsequent cyanolysis of these complexes liberates the et,ph-P4 ligand, and the formation of a thermodynamically favored racemic monometallic intermediate during cyanolysis facilitates isomerization of meso to racemic ligand.;The addition of even small amounts of PPh3 to the dirhodium tetraphosphine hydroformylation catalyst synthesized from the diastereomerically pure rac-et,ph-P4, causes a dramatic drop in the aldehyde linear to branched regioselectivity (25:1 to 3:1) in acetone solvent (90°C, 6.1 bar, 1-hexene). The results indicate extremely effective inhibition of the regioselective bimetallic hydroformylation catalyst and the formation of an inefficient monometallic catalyst system, but not fragmentation to generate free RhH(CO)(PPh3)2 catalysts.;For the dirhodium hydroformylation catalyst the addition of 30% water (by volume) to the acetone solvent gives the highest rate (73 min-1 ) and highest selectivity (33:1 linear:branched (L:B) aldehyde ratio, 1% isomerization or hydrogenation products) as compared to that in acetone with initial TOF of 20 min-1, 25:1 L:B, 2.5% isomerization, and 3.4% alkene hydrogenation for 1-hexene. The dramatic improvement is the result of the more polar water-acetone solvent system preventing phosphine ligand dissociation from the dirhodium catalyst and subsequent formation of inactive species. Comparisons of the catalytic results in water-acetone to those of four representative monometallic, rhodium, modified phosphine systems indicate that the dirhodium catalyst is one of the fastest and the most selective catalyst overall. The dirhodium catalyst also converts aldehydes, but more interestingly alkenes, to carboxylic acids in the presence of water and under hydrogen-depleted conditions. Alkenes are converted via a novel tandem catalysis reaction first involving hydroformylation then aldehyde-water shift catalysis.
机译:正在研究基于四膦配体rac-Et2PCH2CH 2P(Ph)CH2P(Ph)CH2CH2PEt2,rac-et,ph-P4的二甲叉均质加氢甲酰化催化剂。配体合成产生外消旋混合物,外消旋和内消旋非对映异构体的简便高效方法是通过将ph-P4与EtOH中的两当量NiCl2反应,生成几乎定量可分离的内消旋Ni 2Cl4沉淀(et,ph-P4)和可溶性rac-Ni 2Cl4(et,ph-P4)。这些配合物的随后氰解反应释放了et,ph-P4配体,并且在氰化过程中形成了热力学上有利的外消旋单金属中间体,促进了内消旋异构化为外消旋配体;向合成的铑四膦加氢甲酰化催化剂中甚至添加了少量的PPh3。非对映异构纯的rac-et,ph-P4在丙酮溶剂(90°C,6.1 bar,1-己烯)中导致线性至分支区域选择性(25:1至3:1)的醛急剧下降。结果表明,对区域选择性双金属加氢甲酰化催化剂的抑制非常有效,并且形成了效率低下的单金属催化剂体系,但没有裂解生成游离的RhH(CO)(PPh3)2催化剂。对于二氢加氢甲酰化催化剂,添加30%的水(按体积计)与丙酮相比,在丙酮溶剂中的转化率最高(73 min-1),选择性最高(33:1线性:支链(L:B)醛比例,异构化或加氢产物<1%)初始TOF为20 min-1、25:1 L:B,2.5%异构化和3.4%烯烃加氢生成1-己烯。显着改善是极性更高的水-丙酮溶剂系统防止膦配体从dirhodium催化剂上解离并随后形成惰性物质的结果。将水丙酮中的催化结果与四个代表性的单金属,铑,改性膦系统的催化结果进行比较,结果表明,the催化剂是总体上最快,选择性最高的催化剂之一。在水的存在下和贫氢的条件下,dirhodium催化剂还可以将醛(但更有趣的是烯烃)转化为羧酸。烯烃通过新颖的串联催化反应进行转化,该反应首先涉及加氢甲酰化,然后进行醛-水变换催化。

著录项

  • 作者

    Aubry, David.;

  • 作者单位

    Louisiana State University and Agricultural & Mechanical College.;

  • 授予单位 Louisiana State University and Agricultural & Mechanical College.;
  • 学科 Chemistry Inorganic.
  • 学位 Ph.D.
  • 年度 2004
  • 页码 89 p.
  • 总页数 89
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号