首页> 外文学位 >Development of an accelerated method for assessing decay of wood plastic composites (WPC's).
【24h】

Development of an accelerated method for assessing decay of wood plastic composites (WPC's).

机译:开发一种评估木塑复合材料(WPC)衰减的加速方法。

获取原文
获取原文并翻译 | 示例

摘要

This study examined the decay resistance of the pine and maple components of wood plastic composites (WPC's) of varying thicknesses exposed on several culture media to wood decay fungi under laboratory conditions. The ability of malt agar extract (MEA), potato dextrose agar (PDA), amended basal salts, sawdust (maple and red alder), soil (direct exposure, sandwich system and soil block tests), vermiculite, and malt liquid broth (stationary and rotary shaker conditions) to enhance WPC decay was compared with traditional soil block tests.; Modulus of elasticity (MOE), modulus of rupture (MOR), creep, ultimate tensile strength (UTS), moisture content, weight loss or scanning electronic microscopy were used to assess fungal effects on the WPC. MOE, MOR, creep and UTS were poor parameters for assessing decay because the plastic component tended to dominate WPC properties and was not susceptible to fungal attack.; Agar and soil block tests were both suitable for assessing wood decay of the WPC's. Decay rates were strongly influenced by media type and test fungus. WPC specimens exposed to Trametes versicolor or Postia placenta on 1.5% PDA, and those specimens exposed to Gloeophyllum trabeum and P. placenta on MEA reached higher moisture contents and experienced greater weight losses than specimens exposed to the same fungi in the soil block test. Liquid media was unsuitable for enhancing WPC decay, probably due to oxygen limiting conditions.; Scanning electron microscopy (SEM) showed that surface wood particles exposed directly to fungal attack were partially or totally degraded, increasing the void volume and exposing more wood particles to fungal attack, regardless of fungus or composite type.; WPC specimens made of maple were more susceptible to fungal degradation than those made with pine. Increasing WPC thickness reduced moisture content and weight loss of the wood. Slow moisture uptakes sharply reduced fungal attack in thicker specimens. A strong relationship was found between weight loss and moisture content; higher weight losses were consistently associated with higher moisture contents.; The results indicate that WPC decay can be accelerated using both agar and soil as media, provided the specimens are small enough to rapidly sorb moisture.
机译:这项研究检查了在实验室条件下,几种厚度不同的厚度的木质塑料复合材料(WPC)的松木和枫木成分在几种培养基上暴露于木材腐烂真菌的耐腐性。麦芽琼脂提取物(MEA),马铃薯葡萄糖琼脂(PDA),改良的基础盐,锯末(枫木和赤al木),土壤(直接暴露,三明治系统和土壤块试验),ver石和麦芽液体肉汤(固定的)的能力和旋转摇床条件),以提高WPC衰减与传统的土块试验进行了比较。弹性模量(MOE),断裂模量(MOR),蠕变,极限抗张强度(UTS),水分含量,重量损失或扫描电子显微镜被用于评估真菌对WPC的影响。 MOE,MOR,蠕变和UTS是评估衰减的较差参数,因为塑料成分倾向于主导WPC特性,并且不易受真菌侵袭。琼脂和土壤块试验均适合评估WPC的木材腐烂。腐烂率受培养基类型和测试真菌的强烈影响。在土壤阻隔试验中,暴露于1.5%PDA上的Trametes versicolor或Postia胎盘的WPC标本以及暴露于MEA的Gloeophyllum trabeum和P. placenta的WPC标本比暴露于同一真菌的标本达到更高的水分含量和更大的重量损失。液体介质可能不适合用于增强WPC衰减,这可能是由于氧气限制条件所致。扫描电子显微镜(SEM)表明,直接暴露于真菌侵袭的表面木材颗粒被部分或完全降解,增加了空隙体积,并使更多的木材颗粒不受真菌侵害,无论真菌或复合物类型如何。枫木制成的WPC标本比松树制成的木塑标本对真菌降解的敏感性更高。 WPC厚度的增加减少了木材的水分含量和重量损失。较慢的水分吸收可大大减少较厚标本中的真菌侵袭。减肥与水分含量之间存在很强的关系。体重减轻越高,水分含量越高。结果表明,只要样品小到足以迅速吸收水分,使用琼脂和土壤作为培养基都可以加速WPC的腐烂。

著录项

  • 作者

    Silva Guzman, Jose Antonio.;

  • 作者单位

    Oregon State University.;

  • 授予单位 Oregon State University.;
  • 学科 Agriculture Wood Technology.
  • 学位 Ph.D.
  • 年度 2004
  • 页码 188 p.
  • 总页数 188
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 森林采运与利用;
  • 关键词

  • 入库时间 2022-08-17 11:43:39

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号