首页> 外文学位 >Improving the representation of turbulence and clouds in cloud resolving models and general circulation models.
【24h】

Improving the representation of turbulence and clouds in cloud resolving models and general circulation models.

机译:在云解析模型和一般环流模型中改善湍流和云的表示。

获取原文
获取原文并翻译 | 示例

摘要

Over the past few years a new type of general circulation model (GCM) has emerged that is known as the multiscale modeling framework (MMF). The Colorado State University (CSU) MMF represents a coupling between the Community Atmosphere Model (CAM) GCM and the System of Atmospheric Modeling (SAM) cloud resolving model (CRM). Within this MMF the embedded CRM replaces the traditionally used parameterized moist physics in CAM to represent subgrid-scale (SGS) convection. However, due to substantial increases of computational burden associated with the MMF, the embedded CRM is typically run with a horizontal grid size of 4 km. With a horizontal grid size of 4 km, a low-order closure CRM cannot adequately represent shallow convective processes, such as trade-wind cumulus or stratocumulus.;A computationally inexpensive parameterization of turbulence and clouds is presented in this dissertation. An extensive a priori test is performed to determine which functional form of an assumed PDF is best suited for coarse-grid CRMs for both deep shallow and deep convection.;The diagnostic approach to determine the input moments needed for the assumed PDFs uses the subgrid-scale (SGS) turbulent kinetic energy (TKE) as the basis for the parameterization. The term known as the turbulent length scale (L) is examined, as it is needed to parameterize the dissipation of turbulence and therefore is needed to better balance the budgets of SGS TKE. A new formulation of this term is added to the model code which appears to be able to partition resolved and SGS TKE fairly accurately.;Results from "offline" tests of the simple diagnostic closure within SAM shows that the cloud and turbulence properties of shallow convection can be adequately represented when compared to large eddy simulation (LES) benchmark simulations. Results are greatly improved when compared to the standard version of SAM. The preliminary test of the scheme within the embedded CRM of the MMF shows promising results with the simulation of shallow convection. Overall, this scheme represents a new type of flexible turbulence and cloud parameterization that is computationally efficient.
机译:在过去的几年中,出现了一种新型的通用循环模型(GCM),称为多尺度建模框架(MMF)。科罗拉多州立大学(CSU)MMF代表了社区大气模型(CAM)GCM和大气建模系统(SAM)云解析模型(CRM)之间的耦合。在此MMF中,嵌入式CRM替代了CAM中传统使用的参数化湿物理,以表示亚网格规模(SGS)对流。但是,由于与MMF相关的计算负担的显着增加,因此嵌入式CRM的运行水平通常为4 km。在水平网格大小为4 km的情况下,低阶闭合CRM不能充分代表浅对流过程,例如信风积云或平流积云。;本文提出了一种计算成本低廉的湍流和云参数化。进行了广泛的先验测试,以确定假定的PDF的哪种功能形式最适合用于深浅和深对流的粗网格CRM。;确定假定PDF所需输入力矩的诊断方法是使用子网格-标度(SGS)湍动能(TKE)作为参数化的基础。对称为湍流长度标度(L)的术语进行了检查,因为它需要参数化湍流的消散,因此需要更好地平衡SGS TKE的预算。该术语的新公式已添加到模型代码中,该代码似乎能够相当精确地划分分辨力和SGS TKE 。;对SAM内部简单诊断闭合的“离线”测试结果表明,浅对流的云和湍流特性与大型涡流仿真(LES)基准仿真相比,可以充分表示。与SAM的标准版本相比,结果得到了极大的改善。对MMF嵌入式CRM中的方案进行的初步测试通过浅对流的仿真显示了令人鼓舞的结果。总体而言,该方案代表了一种新型的灵活湍流和云计算参数化,其计算效率很高。

著录项

  • 作者

    Bogenschutz, Peter A.;

  • 作者单位

    The University of Utah.;

  • 授予单位 The University of Utah.;
  • 学科 Atmospheric Sciences.
  • 学位 Ph.D.
  • 年度 2013
  • 页码 363 p.
  • 总页数 363
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-17 11:41:18

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号