首页> 外文学位 >Integrated control and estimation based on sliding mode control applied to electrohydraulic actuator.
【24h】

Integrated control and estimation based on sliding mode control applied to electrohydraulic actuator.

机译:基于滑模控制的集成控制和估计应用于电动液压执行器。

获取原文
获取原文并翻译 | 示例

摘要

Many problems in tracking control have been identified over the years, such as the availability of systems states, the presence of noise and system uncertainties, and speed of response, just to name a few. This thesis is concerned with developing novel integrated control and estimation algorithms to overcome some of these problems in order to achieve an efficient tracking performance. Since there are some significant advantages associated with Sliding Mode Control (SMC) or Variable Structure Control (VSC), (fast regulation rate and robustness to uncertainties), this research reviews and extends new filtering concepts for state estimation, referred to as the Variable Structure Filter (VSF) and Smooth Variable Structure Filter (SVSF). These are based on the philosophy of Sliding Mode Control.; The VSF filter is designed to estimate some of the states of a plant when noise and uncertainties are presented. This is accomplished by refining an estimate of the states in an iterative fashion using two filter gains, one based on a noiseless system with no uncertainties and the second gain which reflects these uncertainties. The VSF is combined "seamlessly" with the Sliding Mode Controller to produce an integrated controller called a Sliding Mode Controller and Filter (SMCF). This new controller is shown to be a robust and effective integrated control strategy for linear systems. For nonlinear systems, a novel integrated control strategy called the Smooth Sliding Mode Controller and Filter (SSMCF), fuses the SMC and SVSF in a particular form to address nonlinearities. The gain term in the SVSF is redefined to form a new algorithm called the "SVSF with revised gain" in order to obtain a better estimation performance. Its performance is compared to that of the Extended Kalman Filter (EKF) when applied to a particular nonlinear plant.; The SMCF and SSMCF are applied to the experimental prototype of a precision positioning hydraulic system called an ElectroHydraulic Actuator (EHA) system. The EHA system is known to display nonlinear characteristics but can approximate linear behavior under certain operating conditions, making it ideal to test the robustness of the proposed controllers.; The main conclusion drawn in this research was that the SMCF and SSMCF as developed and implemented, do exhibit robust and high performance state estimation and trajectory tracking control given modeling uncertainties and noise. The controllers were applied to a prototype EHA which demonstrated the use of the controllers in a "real world" application. It was also concluded that the application of the concepts of VSC for the controller can alleviate a challenging mechanical problem caused by a slip-stick characteristic in friction. Another conclusion is that the revised form of the SVSF could obtain robust and fast state estimation for nonlinear systems.; The original contributions of the research include: (i) proposing the SMCF and SSMCF, (ii) applying the Sliding Mode Controller to suppress cross-over oscillations caused by the slip-stick characteristics in friction which often occur in mechanical systems, (iii) the first application of the SVSF for state estimation and (iv) a comparative study of the SVSF and Extended Kalman Filter (EKF) to the EHA demonstrating the superiority of the SVSF for state estimation performance under both steady-state and transient conditions for the application considered.; The dissertation is written in a paper format unlike the traditional Ph.D thesis manuscript. The content of the thesis discourse is based on five manuscripts which are appended at the end of the thesis. Fundamental principles and concepts associated with SMC, VSF, SVSF and the fused controllers are introduced. For each paper, the objectives, approaches, typical results, conclusions and major contributions are presented. Major conclusions are summarized and original contributions reiterated.
机译:多年来,已经确定了跟踪控制中的许多问题,例如系统状态的可用性,噪声和系统不确定性的存在以及响应速度等。本文致力于开发新颖的集成控制和估计算法,以克服这些问题中的一些问题,以实现有效的跟踪性能。由于滑模控制(SMC)或可变结构控制(VSC)具有一些显着的优势(快速调节速率和对不确定性的鲁棒性),因此本研究回顾并扩展了用于状态估计的新滤波概念,称为可变结构滤波器(VSF)和平滑可变结构滤波器(SVSF)。这些基于滑模控制的原理。当出现噪声和不确定性时,VSF滤波器用于估计工厂的某些状态。这是通过使用两个滤波器增益以迭代方式细化状态的估计来实现的,其中一个增益基于无不确定性的无噪声系统,而第二个增益则反映了这些不确定性。 VSF与滑模控制器“无缝”组合,以产生称为滑模控制器和滤波器(SMCF)的集成控制器。这种新型控制器被证明是线性系统的一种强大而有效的集成控制策略。对于非线性系统,一种称为平滑滑模控制器和滤波器(SSMCF)的新颖集成控制策略以特殊形式融合了SMC和SVSF,以解决非线性问题。重新定义SVSF中的增益项,以形成称为“修正增益的SVSF”的新算法,以获得更好的估计性能。当将其应用于特定的非线性设备时,其性能可与扩展卡尔曼滤波器(EKF)的性能进行比较。 SMCF和SSMCF用于称为电动液压执行器(EHA)系统的精密定位液压系统的实验原型。 EHA系统显示非线性特性,但是可以在某些操作条件下近似线性行为,因此非常适合测试所提出控制器的鲁棒性。这项研究得出的主要结论是,在建模不确定性和噪声给定的情况下,已开发和实施的SMCF和SSMCF确实具有鲁棒且高性能的状态估计和轨迹跟踪控制。该控制器被应用于样机EHA,该原型演示了控制器在“现实世界”应用程序中的使用。还得出结论,将VSC概念应用于控制器可以缓解由摩擦中的粘滑特性引起的具有挑战性的机械问题。另一个结论是,SVSF的修改形式可以为非线性系统获得鲁棒和快速的状态估计。该研究的原始贡献包括:(i)提出SMCF和SSMCF,(ii)应用滑模控制器来抑制由机械系统中经常发生的摩擦中的滑粘特性引起的交叉振荡,(iii) SVSF在状态估计中的首次应用;以及(iv)SVSF和扩展卡尔曼滤波器(EKF)与EHA的比较研究,证明了SVSF在稳态和瞬态条件下的状态估计性能均优于该应用考虑过的;与传统的博士学位论文手稿不同,本论文以纸质形式撰写。论文论述的内容基于论文的五篇手稿。介绍了与SMC,VSF,SVSF和融合控制器相关的基本原理和概念。每篇论文均介绍了目标,方法,典型结果,结论和主要贡献。总结了主要结论,并重申了最初的贡献。

著录项

  • 作者

    Wang, Shu.;

  • 作者单位

    The University of Saskatchewan (Canada).;

  • 授予单位 The University of Saskatchewan (Canada).;
  • 学科 Engineering Mechanical.
  • 学位 Ph.D.
  • 年度 2007
  • 页码 174 p.
  • 总页数 174
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 机械、仪表工业;
  • 关键词

  • 入库时间 2022-08-17 11:39:16

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号