首页> 外文会议>World Tribology Congress III vol.1; 20050912-16; Washington,DC(US) >INFLUENCE OF TEST CONDITIONS ON TRIBOLOGICAL BEHAVIOR
【24h】

INFLUENCE OF TEST CONDITIONS ON TRIBOLOGICAL BEHAVIOR

机译:测试条件对摩擦学行为的影响

获取原文
获取原文并翻译 | 示例

摘要

A series of cooperative interlaboratory tests (RR, round robins) was conducted annuallly from 1997 to 2005 by the DIN 51834 Working Group on Tribological Tests using a Translatory Oscillation Apparatus (SRV™~®) in cooperation with ASTM D02. The statistical analysis of these test results shows the influence of cleaning solvent and seizure criteria on the tribological properties regarding O.K.-load of the lubricants tested. Coefficients of friction and wear results are ranked according to the effects of ten different cleaning solvents, where isopropanol gave the lowest values and isopa-raffin solvents the highest. The wear volume is more descriptive than the wear scar diameter. The effect of machine model on coefficients of friction varied from about 0.2 % to 0.9 % of mean. Wear results were not affected. The load step interval of 1, 3 or 6 minutes influences the pass load of solid bonded films.
机译:从1997年至2005年,DIN 51834摩擦学测试工作组每年都使用平移振动装置(SRV™〜)与ASTM D02合作进行一系列协作式实验室间测试(RR,轮循)。这些测试结果的统计分析表明,清洁溶剂和癫痫发作标准对所测润滑油的O.K.负荷的摩擦学性能有影响。根据十种不同清洁溶剂的效果对摩擦系数和磨损结果进行评级,其中异丙醇的数值最低,而异链烷烃的溶剂最高。磨损量比磨损痕迹直径更具描述性。机器模型对摩擦系数的影响从平均值的0.2%到0.9%不等。磨损结果未受影响。 1、3或6分钟的加载步长间隔会影响固体粘合膜的通过负载。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号